Keyword Index

A

  • Acid mine drainage Bio-Remediation of Acid Mine Drainage in the Sarcheshmeh Porphyry Copper Mine by Fungi: Batch and Fixed Bed Process [Volume 46, Issue 1, 2012, Pages 87-103]
  • Acid mine drainage Identification of the Origin and Behaviour of Arsenic in Mine Waste Dumps Using Correlation Analysis: A Case Study Sarcheshmeh Copper Mine [Volume 47, Issue 2, 2013, Pages 139-149]
  • Acid mine drainages Design and implementation of heavy metal prediction in acid mine drainage using multi-output adaptive neuro-fuzzy inference systems (ANFIS) - a case study [Volume 54, Issue 1, 2020, Pages 59-64]
  • Active earth pressure Distribution of lateral active earth pressure on a rigid retaining wall under various motion modes [Volume 54, Issue 1, 2020, Pages 15-25]
  • ADECO-RS Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Adsorption Zn(II) Adsorption Study onto Soils of Sarcheshmeh Copper Mine [Volume 49, Issue 1, 2015, Pages 103-111]
  • Adsorption Experimental study of lead (II) removal using polymorphous silica adsorbents [Volume 53, Issue 1, 2019, Pages 7-13]
  • Advance step A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
  • Air velocity Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines [Volume 53, Issue 2, 2019, Pages 117-121]
  • Alborz-Sharghi coal washing plant The Flotation System Optimization in Alborz-Sharghi Coal Washing Plant; A Laboratory Study [Volume 49, Issue 1, 2015, Pages 19-32]
  • Alteration Alteration dependent physical-mechanical properties of quartz-diorite building stones [Volume 50, Issue 2, 2016, Pages 195-200]
  • Amplitude Versus Offset Amplitude versus Offset (AVO) Technique for Light Hydrocarbon Exploration: A Case Study [Volume 46, Issue 1, 2012, Pages 81-86]
  • Analysis of Variance Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Andalusite Experimental study of lead (II) removal using polymorphous silica adsorbents [Volume 53, Issue 1, 2019, Pages 7-13]
  • ANFIS A Comparative Study between a Pseudo-Forward Equation (PFE) and Intelligence Methods for the Characterization of the North Sea Reservoir [Volume 48, Issue 2, 2014, Pages 173-190]
  • ANFIS Developing new Adaptive Neuro-Fuzzy Inference System models to predict granular soil groutability [Volume 53, Issue 2, 2019, Pages 133-142]
  • ANFIS Estimation of xanthate decomposition percentage as a function of pH, temperature and time by least squares regression and adaptive neuro-fuzzy inference system [Volume 53, Issue 2, 2019, Pages 157-163]
  • ANFIS Design and implementation of heavy metal prediction in acid mine drainage using multi-output adaptive neuro-fuzzy inference systems (ANFIS) - a case study [Volume 54, Issue 1, 2020, Pages 59-64]
  • ANFIS Prediction of suction caissons behavior in cohesive soils using computational intelligence methods [Volume 54, Issue 2, 2020, Pages 109-116]
  • ANFIS-Fuzzy C–Means clustering Hybrid ANFIS with ant colony optimization algorithm for prediction of shear wave velocity from a carbonate reservoir in Iran [Volume 50, Issue 2, 2016, Pages 231-238]
  • ANFIS-subtractive clustering Hybrid ANFIS with ant colony optimization algorithm for prediction of shear wave velocity from a carbonate reservoir in Iran [Volume 50, Issue 2, 2016, Pages 231-238]
  • Anjir-tange The Impact of Anjir –tangeh Coal Washing Plant on Concentration of Some Heavy Metals in the Native Vegetation, Mazandaran Province, Iran [Volume 47, Issue 2, 2013, Pages 151-161]
  • Ant Colony optimization algorithm Hybrid ANFIS with ant colony optimization algorithm for prediction of shear wave velocity from a carbonate reservoir in Iran [Volume 50, Issue 2, 2016, Pages 231-238]
  • ArcGIS Software Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
  • Arching Effect A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
  • Arching effect, Soil arching Soil Arching Behind Retaining Walls under Active Translation Mode: Review and New Insights [Volume 52, Issue 2, 2018, Pages 131-140]
  • ARIMA Modeling and prediction of time-series of monthly copper prices [Volume 53, Issue 1, 2019, Pages 91-97]
  • Artificial Bee Colony (ABC) Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries [Volume 52, Issue 1, 2018, Pages 31-36]
  • Artificial Neural Network Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
  • Artificial Neural Network Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
  • Artificial Neural Network Application of Artificial Neural Network for Stability Analysis of Undercut Slopes [(Articles in Press)]
  • Asmari Wavelet Neural Network: A Hybrid Method in Modeling Heterogeneous Reservoirs [Volume 53, Issue 2, 2019, Pages 203-211]
  • Aspergillus niger Bio-Remediation of Acid Mine Drainage in the Sarcheshmeh Porphyry Copper Mine by Fungi: Batch and Fixed Bed Process [Volume 46, Issue 1, 2012, Pages 87-103]
  • Asperity Paradigm Shift in Studying Joint Micro-Roughness Coefficients using Graph Theory [Volume 53, Issue 2, 2019, Pages 165-174]
  • ASTER Application of fractal modeling and PCA method for hydrothermal alteration mapping in the Saveh area (Central Iran) based on ASTER multispectral data [Volume 50, Issue 1, 2016, Pages 37-48]
  • ASTER Integration of support vector machines for hydrothermal alteration mapping using ASTER data – case study: the northwestern part of the Kerman Cenozoic Magmatic Arc, Iran [Volume 54, Issue 1, 2020, Pages 45-50]
  • Attributes Amplitude versus Offset (AVO) Technique for Light Hydrocarbon Exploration: A Case Study [Volume 46, Issue 1, 2012, Pages 81-86]
  • Attributes Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
  • Auto delineation Fragmentation measurement using image processing [Volume 50, Issue 2, 2016, Pages 211-218]
  • Auxiliary Collector Selective separation of galena and sphalerite from pyrite-rich lead-zinc ores: A case study of the Kooshk mine, Central Iran [Volume 53, Issue 1, 2019, Pages 43-50]

B

  • Bacillus Cereus Using Bacillus Cereus as a Geo-Biological Marker For Gold Prospecting in Iran [Volume 46, Issue 2, 2012, Pages 209-221]
  • Back analysis Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Bacteria Using Bacillus Cereus as a Geo-Biological Marker For Gold Prospecting in Iran [Volume 46, Issue 2, 2012, Pages 209-221]
  • Balancing Grade Cut-off Grade Optimization for Maximizing the Output Rate [Volume 46, Issue 2, 2012, Pages 157-162]
  • Ball filling percentage A method to determine the ball filling, in Miduk copper concentrator SAG mill [Volume 46, Issue 1, 2012, Pages 15-19]
  • Band ratio Integration of support vector machines for hydrothermal alteration mapping using ASTER data – case study: the northwestern part of the Kerman Cenozoic Magmatic Arc, Iran [Volume 54, Issue 1, 2020, Pages 45-50]
  • Bandwidth Two-dimensional upscaling of reservoir data using adaptive bandwidth in the kernel function [Volume 54, Issue 2, 2020, Pages 123-128]
  • Bayesian theory Joint Bayesian Stochastic Inversion of Well Logs and Seismic Data for Volumetric Uncertainty Analysis [Volume 49, Issue 1, 2015, Pages 131-142]
  • Bearing Capacity Experimental Study of Waste Tire-Reinforced Sand Slope [Volume 53, Issue 2, 2019, Pages 183-191]
  • Behbahan aquifer Hydrograph Modeling Using SGSim: A Case Study of Behbahan Aquifer, Southwest of Iran [Volume 47, Issue 2, 2013, Pages 103-113]
  • Behesht-Abad tunnel project Application of Geostatistical Modelling to Study the Exploration Adequacy of Uniaxial Compressive Strength of Intact Rock alongthe Behesht-Abad Tunnel Route [Volume 48, Issue 2, 2014, Pages 127-137]
  • Beneficiation Mineral resources and geo-engineering [Volume 49, Issue 2, 2015, Pages 221-233]
  • Bioavailability Identification of the Origin and Behaviour of Arsenic in Mine Waste Dumps Using Correlation Analysis: A Case Study Sarcheshmeh Copper Mine [Volume 47, Issue 2, 2013, Pages 139-149]
  • Bioleaching Bioleaching of a low grade sphalerite concentrate produced from flotation tailings [Volume 50, Issue 2, 2016, Pages 169-173]
  • Bioleaching Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
  • Biological Marker Using Bacillus Cereus as a Geo-Biological Marker For Gold Prospecting in Iran [Volume 46, Issue 2, 2012, Pages 209-221]
  • Blaine number Effect of Particle Size Distribution and Type of Mineral on the Blaine Number [Volume 54, Issue 1, 2020, Pages 51-57]
  • Blasting Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
  • Blasting Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
  • Blasting Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Blind mineralization Integration of singularity and zonality methods for prospectivity map of blind mineralization [Volume 50, Issue 2, 2016, Pages 189-194]
  • Bond Ball Mill A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample [Volume 46, Issue 2, 2012, Pages 133-140]
  • Box & Jenkins models Hydrograph Modeling Using SGSim: A Case Study of Behbahan Aquifer, Southwest of Iran [Volume 47, Issue 2, 2013, Pages 103-113]
  • Brazilian tensile strength Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
  • Brittleness Indexes Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
  • BTEX An Assessment of Factors Affecting Reactive Transport of Biodegradable BTEX in an Unconfined Aquifer System, Tehran Oil Refinery, Iran [Volume 46, Issue 2, 2012, Pages 193-208]
  • Burn Temperature The effect of chemical composition and burning temperature on pellet quality [Volume 54, Issue 1, 2020, Pages 27-32]

C

  • Calorific value Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
  • Carbonate reservoir Hybrid ANFIS with ant colony optimization algorithm for prediction of shear wave velocity from a carbonate reservoir in Iran [Volume 50, Issue 2, 2016, Pages 231-238]
  • Case study Physical and theoretical modeling of rock slopes against block-flexure toppling failure [Volume 49, Issue 2, 2015, Pages 155-171]
  • Categorical simulation Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
  • Cell Two-dimensional upscaling of reservoir data using adaptive bandwidth in the kernel function [Volume 54, Issue 2, 2020, Pages 123-128]
  • Cement plant Application of grey GIS filtration to identify the potential area for cement plants in South Khorasan Province, Eastern Iran [Volume 53, Issue 2, 2019, Pages 151-155]
  • Censored data Accuracy evaluation of different statistical and geostatistical censored data imputation approaches (Case study: Sari Gunay gold deposit) [Volume 50, Issue 1, 2016, Pages 49-60]
  • Cerussite Proposing a seven-parameter kinetics model for predicting cerussite flotation recovery [Volume 54, Issue 1, 2020, Pages 1-13]
  • CFD Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines [Volume 53, Issue 2, 2019, Pages 117-121]
  • Chahargonbad A hybrid-based clustering algorithm for targeting porphyry copper mineralization at Chahargonbad district in SE Iran [(Articles in Press)]
  • Chalcopyrite Kinetics of chalcopyrite galvanic leaching using sulfate media at the low temperature in the GalvanoxTM process [Volume 50, Issue 2, 2016, Pages 157-161]
  • Chalcopyrite The role of catalyst in the passivation of chalcopyrite during leaching [Volume 51, Issue 1, 2017, Pages 91-96]
  • Characterization Characterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation [Volume 53, Issue 2, 2019, Pages 111-116]
  • Chromite ore deposits An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
  • Circuit analysis Recent developments in configuration design and optimization of mineral separation circuits; A Review [Volume 53, Issue 1, 2019, Pages 51-61]
  • Circuit configuration Recent developments in configuration design and optimization of mineral separation circuits; A Review [Volume 53, Issue 1, 2019, Pages 51-61]
  • Classification Applying rock engineering systems (RES) approach to evaluate and classify the coal spontaneous combustion potential in Eastern Alborz coal mines [Volume 47, Issue 2, 2013, Pages 115-127]
  • Classification High performance of the support vector machine in classifying hyperspectral data using a limited dataset [Volume 49, Issue 2, 2015, Pages 253-268]
  • Clone-Proof Schwartz Sequential Dropping Paradigm Shift in Studying Joint Micro-Roughness Coefficients using Graph Theory [Volume 53, Issue 2, 2019, Pages 165-174]
  • Clustering A hybrid-based clustering algorithm for targeting porphyry copper mineralization at Chahargonbad district in SE Iran [(Articles in Press)]
  • Clustering Algorithm Developing new Adaptive Neuro-Fuzzy Inference System models to predict granular soil groutability [Volume 53, Issue 2, 2019, Pages 133-142]
  • Coal Applying rock engineering systems (RES) approach to evaluate and classify the coal spontaneous combustion potential in Eastern Alborz coal mines [Volume 47, Issue 2, 2013, Pages 115-127]
  • Coal Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
  • Coal Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
  • Coal Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Coal Mine Investigating the effect of fractures on unusual gas emission in coal mines; case study of Parvadeh coal mine, Iran [Volume 50, Issue 2, 2016, Pages 163-168]
  • Coal Mine Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran [Volume 53, Issue 1, 2019, Pages 15-23]
  • Coal mines Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines [Volume 53, Issue 2, 2019, Pages 117-121]
  • Coal Recycling Coal Recycling from Tailings using Flotation with 2-Level Experimental Design Techniques [Volume 46, Issue 1, 2012, Pages 1-13]
  • Coal spontaneous combustion potential index (CSCPi) Applying rock engineering systems (RES) approach to evaluate and classify the coal spontaneous combustion potential in Eastern Alborz coal mines [Volume 47, Issue 2, 2013, Pages 115-127]
  • Cohesive crack model Application of cohesive crack model to simulation of rocks mechanical behavior in grain-based distinct element model [Volume 54, Issue 1, 2020, Pages 87-92]
  • Collapsibility index Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Combustible recovery, Size of particles Determination of the difference in recovery and kinetics of various size fractions of gilsonite in rougher and cleaner flotation processes [Volume 53, Issue 1, 2019, Pages 25-31]
  • Compaction Crude oil Effects on Some Engineering Properties of Sandy Alluvial Soil [(Articles in Press)]
  • Completely Reversed Loading Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Compression The Effects of Ore Properties on the Characterization of Suspension in Settling and Compression [Volume 48, Issue 1, 2014, Pages 101-114]
  • Concentration–Area (C-A) fractal model Application of fractal modeling and PCA method for hydrothermal alteration mapping in the Saveh area (Central Iran) based on ASTER multispectral data [Volume 50, Issue 1, 2016, Pages 37-48]
  • Concrete The effects of temperature on mechanical properties of rocks [Volume 54, Issue 2, 2020, Pages 147-152]
  • Conforming mesh A new conforming mesh generator for three-dimensional discrete fracture networks [Volume 53, Issue 1, 2019, Pages 67-78]
  • Constitutive model Application of cohesive crack model to simulation of rocks mechanical behavior in grain-based distinct element model [Volume 54, Issue 1, 2020, Pages 87-92]
  • Contamination Crude oil Effects on Some Engineering Properties of Sandy Alluvial Soil [(Articles in Press)]
  • Continuous leaching An improved model of continuous leaching systems using segregation approach [Volume 54, Issue 2, 2020, Pages 129-133]
  • Control Screen A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample [Volume 46, Issue 2, 2012, Pages 133-140]
  • Conventional regression analysis Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
  • Copper Bio-Remediation of Acid Mine Drainage in the Sarcheshmeh Porphyry Copper Mine by Fungi: Batch and Fixed Bed Process [Volume 46, Issue 1, 2012, Pages 87-103]
  • Copper Modeling and prediction of time-series of monthly copper prices [Volume 53, Issue 1, 2019, Pages 91-97]
  • Copper Mineralization Geostatistical-based geophysical model of electrical resistivity and chargeability data applied to image copper mineralization in the Ghalandar deposit, Iran [Volume 54, Issue 2, 2020, Pages 153-160]
  • Correlation Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
  • Counterweight Balance A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
  • CPLEX Comparison of the various dispatching strategies for truck-shovel productivity optimization in open pit mines [Volume 53, Issue 2, 2019, Pages 193-202]
  • CPU processing time Wavelet Neural Network: A Hybrid Method in Modeling Heterogeneous Reservoirs [Volume 53, Issue 2, 2019, Pages 203-211]
  • CRBM CRFA-CRBM: a hybrid technique for anomaly recognition in regional geochemical exploration; case study: Dehsalm area, east of Iran [Volume 54, Issue 1, 2020, Pages 33-38]
  • Creep Effect of solid impurity on creep behavior of salt rocks of the Hormoz formation [Volume 54, Issue 2, 2020, Pages 161-166]
  • Crude Oil Crude oil Effects on Some Engineering Properties of Sandy Alluvial Soil [(Articles in Press)]
  • Cu and Mo dissolution The Effect of Different Additives and Medium on the Bioleaching of Molybdenite for Cu and Mo Extraction Using Mix Mesophilic Microorganism [Volume 47, Issue 1, 2013, Pages 61-80]
  • Cu-Mo concentrate Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
  • Cumulative Damage Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Cut-off Grade Cut-off Grade Optimization for Maximizing the Output Rate [Volume 46, Issue 2, 2012, Pages 157-162]
  • Cutting performance Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]

D

  • Data Fusion Paradigm Shift in Studying Joint Micro-Roughness Coefficients using Graph Theory [Volume 53, Issue 2, 2019, Pages 165-174]
  • Data Fusion Rock physical modeling enhancement in hydrocarbon reservoirs using Choquet fuzzy integral fusion approach [Volume 54, Issue 2, 2020, Pages 101-108]
  • Data modeling Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
  • Davis tube test Effect of Particle Size Distribution and Type of Mineral on the Blaine Number [Volume 54, Issue 1, 2020, Pages 51-57]
  • Daylight collapse Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Decomposition percentage Estimation of xanthate decomposition percentage as a function of pH, temperature and time by least squares regression and adaptive neuro-fuzzy inference system [Volume 53, Issue 2, 2019, Pages 157-163]
  • Deformation modulus A model for estimation of stress-dependent deformation modulus of rock mass [Volume 53, Issue 1, 2019, Pages 63-67]
  • Degraded zones Three-Dimensional Geostatistical Analysis of Rock Fracture Roughness and Its Degradation with Shearing [Volume 47, Issue 2, 2013, Pages 163-179]
  • Dehsalm CRFA-CRBM: a hybrid technique for anomaly recognition in regional geochemical exploration; case study: Dehsalm area, east of Iran [Volume 54, Issue 1, 2020, Pages 33-38]
  • Delaunay A new conforming mesh generator for three-dimensional discrete fracture networks [Volume 53, Issue 1, 2019, Pages 67-78]
  • Delijan Identification of Ti- anomaly in stream sediment geochemistry using of stepwise factor analysis and multifractal model in Delijan district, Iran [Volume 50, Issue 1, 2016, Pages 77-95]
  • Density Performance improvement of the Sarcheshmeh Copper Complex Cu-Mo thickener using a vane type feedwell [Volume 53, Issue 1, 2019, Pages 79-82]
  • Design and Construction Process (DCP) Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Design of experiment (DOE) Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Deterministic design Probabilistic design: The future of rock engineering [Volume 46, Issue 1, 2012, Pages 33-42]
  • DFN A new conforming mesh generator for three-dimensional discrete fracture networks [Volume 53, Issue 1, 2019, Pages 67-78]
  • Difficult geological conditions Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Dijkstra Algorithm Open pit limit optimization using dijkstra’s algorithm [Volume 54, Issue 1, 2020, Pages 39-43]
  • Directional density An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
  • Direct Modeling Amplitude versus Offset (AVO) Technique for Light Hydrocarbon Exploration: A Case Study [Volume 46, Issue 1, 2012, Pages 81-86]
  • Discrete element method Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
  • Discrete fracture network Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
  • Discrete fracture network Developing a 3D stochastic discrete fracture network model for hydraulic analyses [Volume 52, Issue 2, 2018, Pages 167-175]
  • Dissolution modelling An improved model of continuous leaching systems using segregation approach [Volume 54, Issue 2, 2020, Pages 129-133]
  • DPM Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines [Volume 53, Issue 2, 2019, Pages 117-121]
  • Dry processing Characterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation [Volume 53, Issue 2, 2019, Pages 111-116]
  • Dual Porosity Coupling Geomechanics and Transport in Naturally Fractured Reservoirs [Volume 46, Issue 2, 2012, Pages 105-131]
  • Dynamic frothability index A new method for determination of frothability of frothers by using water recovery measurement [Volume 50, Issue 2, 2016, Pages 249-255]

E

  • Earth pressure balance (EPB) Numerical modeling of tunneling induced ground deformation and its control [Volume 50, Issue 2, 2016, Pages 183-188]
  • Earth’s Crust Mineral resources and geo-engineering [Volume 49, Issue 2, 2015, Pages 221-233]
  • Earth Slopes Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
  • Eastern Alborz coal mines Applying rock engineering systems (RES) approach to evaluate and classify the coal spontaneous combustion potential in Eastern Alborz coal mines [Volume 47, Issue 2, 2013, Pages 115-127]
  • Elasto-Plastic A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies [Volume 47, Issue 1, 2013, Pages 81-90]
  • Electrical resistivity Geostatistical-based geophysical model of electrical resistivity and chargeability data applied to image copper mineralization in the Ghalandar deposit, Iran [Volume 54, Issue 2, 2020, Pages 153-160]
  • Electrum Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Empirical Technique Pillar Design in the Hard Rock Mines of South Africa [Volume 46, Issue 2, 2012, Pages 163-191]
  • Engineering geology Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Environmental Impact The Impact of Anjir –tangeh Coal Washing Plant on Concentration of Some Heavy Metals in the Native Vegetation, Mazandaran Province, Iran [Volume 47, Issue 2, 2013, Pages 151-161]
  • Environmental Impact Investigation on life cycle assessment of lead and zinc production [Volume 49, Issue 2, 2015, Pages 245-252]
  • EPB Geological Hazards analysis in Urban Tunneling by EPB Machine (Case study: Tehran subway line 7 tunnel) [Volume 50, Issue 1, 2016, Pages 23-36]
  • EPB shield tunneling machine Evaluation of the Heading Confinement Pressure Effect on Ground Settlement for EPBTBM Using Full 3D Numerical Analysis [Volume 47, Issue 1, 2013, Pages 13-32]
  • Epistemic Uncertainty Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Estimation Estimation of xanthate decomposition percentage as a function of pH, temperature and time by least squares regression and adaptive neuro-fuzzy inference system [Volume 53, Issue 2, 2019, Pages 157-163]
  • Estimation variance Accounting for secondary variable for the classification of mineral resources using co-kriging technique; a Case study of Sarcheshmeh porphyry copper deposit [Volume 46, Issue 1, 2012, Pages 67-80]
  • E_Type map Hydrograph Modeling Using SGSim: A Case Study of Behbahan Aquifer, Southwest of Iran [Volume 47, Issue 2, 2013, Pages 103-113]
  • Experimental design Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
  • Experiment design The effect of chemical composition and burning temperature on pellet quality [Volume 54, Issue 1, 2020, Pages 27-32]
  • Explosion Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Extension Principle Considering the Epistemic Uncertainties of the Variogram Model in Locating Additional Exploratory Drillholes [Volume 49, Issue 1, 2015, Pages 67-74]
  • Extension Principle Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Extractive Metallurgy Mineral resources and geo-engineering [Volume 49, Issue 2, 2015, Pages 221-233]

F

  • Factor of safety The Effects of Strength Parameters on Slope Safety Factor in 2D & 3D Analyses using Numerical Methods [Volume 54, Issue 1, 2020, Pages 71-75]
  • Failure mechanism Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]
  • Failure Modes Effects of Weak Layer Angle and Thickness on the Stability of Rock Slopes [Volume 50, Issue 1, 2016, Pages 97-110]
  • Farrokhi earth dam Stability assessment of the Farrokhi earth embankment dam using the pseudo-static and deformation based methods [Volume 49, Issue 2, 2015, Pages 205-220]
  • Fatigue of rocks Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Fault Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Faults and fracture Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
  • FDAHP Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran [Volume 53, Issue 1, 2019, Pages 15-23]
  • FDM The Effects of Strength Parameters on Slope Safety Factor in 2D & 3D Analyses using Numerical Methods [Volume 54, Issue 1, 2020, Pages 71-75]
  • Feflow Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method [Volume 50, Issue 1, 2016, Pages 145-156]
  • FEM A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies [Volume 47, Issue 1, 2013, Pages 81-90]
  • FEM A new conforming mesh generator for three-dimensional discrete fracture networks [Volume 53, Issue 1, 2019, Pages 67-78]
  • FEM The Effects of Strength Parameters on Slope Safety Factor in 2D & 3D Analyses using Numerical Methods [Volume 54, Issue 1, 2020, Pages 71-75]
  • Finite difference Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Finite Element Method Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method [Volume 50, Issue 1, 2016, Pages 145-156]
  • Finite Element Method Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
  • Fish-tail nozzle Performance improvement of the Sarcheshmeh Copper Complex Cu-Mo thickener using a vane type feedwell [Volume 53, Issue 1, 2019, Pages 79-82]
  • Flotation The reclamation of mica flakes from tailing disposal using gravity separators and flotation [Volume 50, Issue 1, 2016, Pages 61-76]
  • Flotation Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
  • Flotation Investigating the effects of particle size and dosage of talc nanoparticles as a novel solid collector in quartz flotation [Volume 53, Issue 1, 2019, Pages 1-6]
  • Flotation Flotation of zinc silicate ore: A focus on effective parameters, synergistic effect of mixed cationic collectors and its mechanism [Volume 53, Issue 1, 2019, Pages 33-41]
  • Flotation Selective separation of galena and sphalerite from pyrite-rich lead-zinc ores: A case study of the Kooshk mine, Central Iran [Volume 53, Issue 1, 2019, Pages 43-50]
  • Flotation Proposing a seven-parameter kinetics model for predicting cerussite flotation recovery [Volume 54, Issue 1, 2020, Pages 1-13]
  • Flotation frother A new method for determination of frothability of frothers by using water recovery measurement [Volume 50, Issue 2, 2016, Pages 249-255]
  • Flotation system The Flotation System Optimization in Alborz-Sharghi Coal Washing Plant; A Laboratory Study [Volume 49, Issue 1, 2015, Pages 19-32]
  • Flowsheet Characterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation [Volume 53, Issue 2, 2019, Pages 111-116]
  • Fluid loss Gas migration through cement slurries analysis: A comparative laboratory study [Volume 49, Issue 2, 2015, Pages 281-288]
  • Fourier transform Proposing New Methods to Enhance the Low-Resolution Simulated GPR Responses in the Frequency and Wavelet Domains [Volume 48, Issue 2, 2014, Pages 159-172]
  • Fractal-Wavelet based Methods Paradigm Shift in Studying Joint Micro-Roughness Coefficients using Graph Theory [Volume 53, Issue 2, 2019, Pages 165-174]
  • Fracture Investigating the effect of fractures on unusual gas emission in coal mines; case study of Parvadeh coal mine, Iran [Volume 50, Issue 2, 2016, Pages 163-168]
  • Fracture connectivity Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
  • Fractured Formation Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method [Volume 50, Issue 1, 2016, Pages 145-156]
  • Fractured reservoirs Coupling Geomechanics and Transport in Naturally Fractured Reservoirs [Volume 46, Issue 2, 2012, Pages 105-131]
  • Fractured Rock Mass A Laboratory Study on Stress Dependency of Joint Transmissivity and its Modeling with Neural Networks, Fuzzy Method and Regression Analysis [Volume 46, Issue 1, 2012, Pages 57-66]
  • Fracture orientation Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
  • Fracture set Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
  • Fragmentation Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
  • Fragmentation Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Fragmentation Measurement Fragmentation measurement using image processing [Volume 50, Issue 2, 2016, Pages 211-218]
  • Friction Angle The Effects of Strength Parameters on Slope Safety Factor in 2D & 3D Analyses using Numerical Methods [Volume 54, Issue 1, 2020, Pages 71-75]
  • Froth A new method for determination of frothability of frothers by using water recovery measurement [Volume 50, Issue 2, 2016, Pages 249-255]
  • Froth stability A new method for determination of frothability of frothers by using water recovery measurement [Volume 50, Issue 2, 2016, Pages 249-255]
  • Full-face cross-section On the selection of an appropriate excavation pattern for urban tunnels with big cross-section: A case study [Volume 49, Issue 2, 2015, Pages 297-307]
  • Fuzzy Delphi Analytical Hierarchy Process (FDAHP) Sustainable Development Assessment in Underground Coal mining by Developing a Novel Index [(Articles in Press)]
  • Fuzzy theory Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
  • Fuzzy variogram Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]

G

  • Gadvan Formation Application of Thermal Modelling for Geochemical Characterization of Gadvan Formation, Persian Gulf, Iran [Volume 48, Issue 2, 2014, Pages 137-146]
  • Galvanic leaching Kinetics of chalcopyrite galvanic leaching using sulfate media at the low temperature in the GalvanoxTM process [Volume 50, Issue 2, 2016, Pages 157-161]
  • Garau formation Application of Discriminant Analysis for Studying the Source Rock Potential of Probable Formations in the Lorestan Basin, Iran [Volume 48, Issue 1, 2014, Pages 31-54]
  • Gas migration Gas migration through cement slurries analysis: A comparative laboratory study [Volume 49, Issue 2, 2015, Pages 281-288]
  • Gas outburst Investigating the effect of fractures on unusual gas emission in coal mines; case study of Parvadeh coal mine, Iran [Volume 50, Issue 2, 2016, Pages 163-168]
  • Gel strength Gas migration through cement slurries analysis: A comparative laboratory study [Volume 49, Issue 2, 2015, Pages 281-288]
  • Geochemical data Optimizing the Grade Classification Model of Mineralized Zones Using a Learning Method Based on Harmony Search Algorithm [Volume 53, Issue 2, 2019, Pages 123-131]
  • Geochemical exploration CRFA-CRBM: a hybrid technique for anomaly recognition in regional geochemical exploration; case study: Dehsalm area, east of Iran [Volume 54, Issue 1, 2020, Pages 33-38]
  • Geochemical zonality index Integration of singularity and zonality methods for prospectivity map of blind mineralization [Volume 50, Issue 2, 2016, Pages 189-194]
  • Geographical Information System Application of grey GIS filtration to identify the potential area for cement plants in South Khorasan Province, Eastern Iran [Volume 53, Issue 2, 2019, Pages 151-155]
  • Geological boundaries Application of truncated gaussian simulation to ore-waste boundary modeling of Golgohar iron deposit [Volume 50, Issue 2, 2016, Pages 175-181]
  • Geomechanical Parameters Numerical Investigation of the Impact of Geomechanical Parameters of Formations on Well Integrity of One of the Iranian Oil Fields [Volume 54, Issue 2, 2020, Pages 179-183]
  • Geomechanics Coupling Geomechanics and Transport in Naturally Fractured Reservoirs [Volume 46, Issue 2, 2012, Pages 105-131]
  • Geostatistical estimation Application of Geostatistical Modelling to Study the Exploration Adequacy of Uniaxial Compressive Strength of Intact Rock alongthe Behesht-Abad Tunnel Route [Volume 48, Issue 2, 2014, Pages 127-137]
  • Geostatistical modeling Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
  • Geostatistics Considering the Epistemic Uncertainties of the Variogram Model in Locating Additional Exploratory Drillholes [Volume 49, Issue 1, 2015, Pages 67-74]
  • Geostatistics Joint Bayesian Stochastic Inversion of Well Logs and Seismic Data for Volumetric Uncertainty Analysis [Volume 49, Issue 1, 2015, Pages 131-142]
  • Geotechnical Engineering Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Geotechnical parameters Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Gilsonite Determination of the difference in recovery and kinetics of various size fractions of gilsonite in rougher and cleaner flotation processes [Volume 53, Issue 1, 2019, Pages 25-31]
  • Global warming Investigation on life cycle assessment of lead and zinc production [Volume 49, Issue 2, 2015, Pages 245-252]
  • GoldSize Fragmentation measurement using image processing [Volume 50, Issue 2, 2016, Pages 211-218]
  • Gold Source Using Bacillus Cereus as a Geo-Biological Marker For Gold Prospecting in Iran [Volume 46, Issue 2, 2012, Pages 209-221]
  • Gorgan Plain Amplitude versus Offset (AVO) Technique for Light Hydrocarbon Exploration: A Case Study [Volume 46, Issue 1, 2012, Pages 81-86]
  • Grade classification Optimizing the Grade Classification Model of Mineralized Zones Using a Learning Method Based on Harmony Search Algorithm [Volume 53, Issue 2, 2019, Pages 123-131]
  • Grain based distinct element model Application of cohesive crack model to simulation of rocks mechanical behavior in grain-based distinct element model [Volume 54, Issue 1, 2020, Pages 87-92]
  • Grain based model Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]
  • Granite The effects of temperature on mechanical properties of rocks [Volume 54, Issue 2, 2020, Pages 147-152]
  • Granular soil Developing new Adaptive Neuro-Fuzzy Inference System models to predict granular soil groutability [Volume 53, Issue 2, 2019, Pages 133-142]
  • Graph Theory Open pit limit optimization using dijkstra’s algorithm [Volume 54, Issue 1, 2020, Pages 39-43]
  • Ground-Penetrating Radar (GPR) Proposing New Methods to Enhance the Low-Resolution Simulated GPR Responses in the Frequency and Wavelet Domains [Volume 48, Issue 2, 2014, Pages 159-172]
  • Ground surface settlement On the selection of an appropriate excavation pattern for urban tunnels with big cross-section: A case study [Volume 49, Issue 2, 2015, Pages 297-307]
  • Ground vibration Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
  • Ground vibration Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Ground vibration A nonlinear model to estimate vibration frequencies in surface mines [Volume 54, Issue 2, 2020, Pages 167-171]
  • Groutability Developing new Adaptive Neuro-Fuzzy Inference System models to predict granular soil groutability [Volume 53, Issue 2, 2019, Pages 133-142]

H

  • Hard Rock Pillar Design Pillar Design in the Hard Rock Mines of South Africa [Volume 46, Issue 2, 2012, Pages 163-191]
  • Harmony Search Optimizing the Grade Classification Model of Mineralized Zones Using a Learning Method Based on Harmony Search Algorithm [Volume 53, Issue 2, 2019, Pages 123-131]
  • HCP coils system Calculation of One-dimensional Forward Modelling of Helicopter-borne Electromagnetic Data and a Sensitivity Matrix Using Fast Hankel Transforms [Volume 48, Issue 1, 2014, Pages 1-9]
  • Heavily jointed rock mass Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system [Volume 51, Issue 2, 2017, Pages 133-138]
  • Heavy media separation Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
  • Heavy metals Design and implementation of heavy metal prediction in acid mine drainage using multi-output adaptive neuro-fuzzy inference systems (ANFIS) - a case study [Volume 54, Issue 1, 2020, Pages 59-64]
  • Height of destressed zone Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
  • HEM One-Dimensional Modeling of Helicopter-Borne Electromagnetic Data Using Marquardt-Levenberg Including Backtracking-Armijo Line Search Strategy [Volume 53, Issue 2, 2019, Pages 143-150]
  • Hemimorphite Flotation of zinc silicate ore: A focus on effective parameters, synergistic effect of mixed cationic collectors and its mechanism [Volume 53, Issue 1, 2019, Pages 33-41]
  • HEM method Calculation of One-dimensional Forward Modelling of Helicopter-borne Electromagnetic Data and a Sensitivity Matrix Using Fast Hankel Transforms [Volume 48, Issue 1, 2014, Pages 1-9]
  • Heterogeneous Reservoirs Wavelet Neural Network: A Hybrid Method in Modeling Heterogeneous Reservoirs [Volume 53, Issue 2, 2019, Pages 203-211]
  • Heuristic algorithm Introducing a User-friendly Computer Program for Determining the Location of Underground Stopes [Volume 54, Issue 1, 2020, Pages 77-85]
  • Heuristic algorithm A non-monetary valuation system for open-pit mine design [Volume 54, Issue 2, 2020, Pages 135-145]
  • Hodogram-Cross Plot Amplitude versus Offset (AVO) Technique for Light Hydrocarbon Exploration: A Case Study [Volume 46, Issue 1, 2012, Pages 81-86]
  • Homogeneous dam Optimization of horizontal drain dimensions in homogeneous earth dams using neural network [Volume 54, Issue 2, 2020, Pages 173-177]
  • Horizontal drainage Optimization of horizontal drain dimensions in homogeneous earth dams using neural network [Volume 54, Issue 2, 2020, Pages 173-177]
  • Hormuz series Effect of solid impurity on creep behavior of salt rocks of the Hormoz formation [Volume 54, Issue 2, 2020, Pages 161-166]
  • Hydraulic analyses Developing a 3D stochastic discrete fracture network model for hydraulic analyses [Volume 52, Issue 2, 2018, Pages 167-175]
  • Hydraulic conductivity and Specific gravity Crude oil Effects on Some Engineering Properties of Sandy Alluvial Soil [(Articles in Press)]
  • Hydraulic fracture Predicting the Occurrence of Hydraulic Fracture in Grouting Operations Based on the Pressure in the Penetrated Cement Grout [Volume 51, Issue 2, 2017, Pages 113-118]
  • Hydraulic fracture Lattice numerical simulations of hydraulic fractures interacting with oblique natural interfaces [Volume 53, Issue 1, 2019, Pages 83-89]
  • Hydrostatic pressure Gas migration through cement slurries analysis: A comparative laboratory study [Volume 49, Issue 2, 2015, Pages 281-288]
  • Hydrothermal alteration High performance of the support vector machine in classifying hyperspectral data using a limited dataset [Volume 49, Issue 2, 2015, Pages 253-268]
  • Hydrothermal alteration Integration of support vector machines for hydrothermal alteration mapping using ASTER data – case study: the northwestern part of the Kerman Cenozoic Magmatic Arc, Iran [Volume 54, Issue 1, 2020, Pages 45-50]
  • Hyperspectral High performance of the support vector machine in classifying hyperspectral data using a limited dataset [Volume 49, Issue 2, 2015, Pages 253-268]

I

  • Imperialist competitive algorithm An imperialist competitive algorithm for solving the production scheduling problem in open pit mine [Volume 50, Issue 1, 2016, Pages 131-143]
  • Imperialist competitive algorithm A nonlinear model to estimate vibration frequencies in surface mines [Volume 54, Issue 2, 2020, Pages 167-171]
  • Impurity Effect of solid impurity on creep behavior of salt rocks of the Hormoz formation [Volume 54, Issue 2, 2020, Pages 161-166]
  • Industrial Minerals Mineral resources and geo-engineering [Volume 49, Issue 2, 2015, Pages 221-233]
  • Integer linear programming An imperialist competitive algorithm for solving the production scheduling problem in open pit mine [Volume 50, Issue 1, 2016, Pages 131-143]
  • Investment Evaluation of Technological Changes’ Impact on Scarcity of Minerals by a Value Chain Approach: Introducing a Conceptual Model [Volume 48, Issue 1, 2014, Pages 81-100]
  • Iran Application of Thermal Modelling for Geochemical Characterization of Gadvan Formation, Persian Gulf, Iran [Volume 48, Issue 2, 2014, Pages 137-146]
  • Iran The Use of Robust Factor Analysis of Compositional Geochemical Data for the Recognition of the Target Area in Khusf 1:100000 Sheet, South Khorasan, Iran [Volume 48, Issue 2, 2014, Pages 191-199]
  • Iron ore Application of truncated gaussian simulation to ore-waste boundary modeling of Golgohar iron deposit [Volume 50, Issue 2, 2016, Pages 175-181]
  • Iron slag A Study on the Recovery of Titanium Dioxide from a Blast Furnace Slag, Using Roasting and Acid Leaching [Volume 53, Issue 2, 2019, Pages 175-181]

J

  • Jajarm Deposite Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Jig Machine Application of gravity separators for enrichment of South Chah-Palang tungsten ore [Volume 50, Issue 1, 2016, Pages 1-12]
  • Jointed rock mass Developing a 3D stochastic discrete fracture network model for hydraulic analyses [Volume 52, Issue 2, 2018, Pages 167-175]
  • JRC Paradigm Shift in Studying Joint Micro-Roughness Coefficients using Graph Theory [Volume 53, Issue 2, 2019, Pages 165-174]

K

  • Kerman Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Kerman City Investigating the Effect of Sedimentary Basin on Consolidation of Kerman Fine-Grained Soils [Volume 52, Issue 2, 2018, Pages 125-129]
  • Kernel Two-dimensional upscaling of reservoir data using adaptive bandwidth in the kernel function [Volume 54, Issue 2, 2020, Pages 123-128]
  • Key words: Alluvial Crude oil Effects on Some Engineering Properties of Sandy Alluvial Soil [(Articles in Press)]
  • Keywords: Hydrothermal alteration Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Kinetic models Determination of the difference in recovery and kinetics of various size fractions of gilsonite in rougher and cleaner flotation processes [Volume 53, Issue 1, 2019, Pages 25-31]
  • Kooh-Panj Cu-Mo deposit Optimizing the Grade Classification Model of Mineralized Zones Using a Learning Method Based on Harmony Search Algorithm [Volume 53, Issue 2, 2019, Pages 123-131]
  • Kriging Considering the Epistemic Uncertainties of the Variogram Model in Locating Additional Exploratory Drillholes [Volume 49, Issue 1, 2015, Pages 67-74]
  • Kriging Geostatistical-based geophysical model of electrical resistivity and chargeability data applied to image copper mineralization in the Ghalandar deposit, Iran [Volume 54, Issue 2, 2020, Pages 153-160]
  • Kruskal-Wallis Test Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Kyanite Experimental study of lead (II) removal using polymorphous silica adsorbents [Volume 53, Issue 1, 2019, Pages 7-13]

L

  • Laboratory tests Effect of solid impurity on creep behavior of salt rocks of the Hormoz formation [Volume 54, Issue 2, 2020, Pages 161-166]
  • Lateral earth pressure DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
  • Lateral earth pressure Soil Arching Behind Retaining Walls under Active Translation Mode: Review and New Insights [Volume 52, Issue 2, 2018, Pages 131-140]
  • Lattice Lattice numerical simulations of hydraulic fractures interacting with oblique natural interfaces [Volume 53, Issue 1, 2019, Pages 83-89]
  • Leaching A Study on the Recovery of Titanium Dioxide from a Blast Furnace Slag, Using Roasting and Acid Leaching [Volume 53, Issue 2, 2019, Pages 175-181]
  • Leaching Kinetic Selective leaching of low-grade phosphate ore using a mixture of organic acids [Volume 54, Issue 1, 2020, Pages 65-70]
  • Lead(II) ion Experimental study of lead (II) removal using polymorphous silica adsorbents [Volume 53, Issue 1, 2019, Pages 7-13]
  • Life Cycle Assessment Investigation on life cycle assessment of lead and zinc production [Volume 49, Issue 2, 2015, Pages 245-252]
  • Light Hydrocarbon Amplitude versus Offset (AVO) Technique for Light Hydrocarbon Exploration: A Case Study [Volume 46, Issue 1, 2012, Pages 81-86]
  • Limit equilibrium Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Li model Comparison of the various dispatching strategies for truck-shovel productivity optimization in open pit mines [Volume 53, Issue 2, 2019, Pages 193-202]
  • Linear Damage Rule Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Linear programming Productivity Improvement in a Steel Industry using Supply Chain Management Technique [Volume 47, Issue 1, 2013, Pages 51-59]
  • Linear programming (LP) A New Algorithm for Determining Ultimate Pit Limits Based on Network Optimization [Volume 47, Issue 2, 2013, Pages 129-137]
  • Lithosphere Mineral resources and geo-engineering [Volume 49, Issue 2, 2015, Pages 221-233]
  • Local phase filters Edge detection in gravity field of the Gheshm sedimentary basin [Volume 47, Issue 1, 2013, Pages 41-50]
  • Low-grade iron ore Characterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation [Volume 53, Issue 2, 2019, Pages 111-116]
  • Low temperature Kinetics of chalcopyrite galvanic leaching using sulfate media at the low temperature in the GalvanoxTM process [Volume 50, Issue 2, 2016, Pages 157-161]

M

  • Macerals Content Effect of maceral content on tendency of spontaneous coal combustion using the R70 method [Volume 54, Issue 2, 2020, Pages 93-99]
  • Machine learning Optimizing the Grade Classification Model of Mineralized Zones Using a Learning Method Based on Harmony Search Algorithm [Volume 53, Issue 2, 2019, Pages 123-131]
  • Magnetic Anomaly 3D Inversion of Magnetic Data through Wavelet based Regularization Method [Volume 49, Issue 1, 2015, Pages 1-18]
  • Man-riding vehicle Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines [Volume 53, Issue 2, 2019, Pages 117-121]
  • Marlstone Internal erosion under spillway rested on an embankment dam [Volume 49, Issue 2, 2015, Pages 269-279]
  • Marquardt-Levenberg One-Dimensional Modeling of Helicopter-Borne Electromagnetic Data Using Marquardt-Levenberg Including Backtracking-Armijo Line Search Strategy [Volume 53, Issue 2, 2019, Pages 143-150]
  • Mathematical relations Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • MATLAB Software Fragmentation measurement using image processing [Volume 50, Issue 2, 2016, Pages 211-218]
  • Maximum Output Cut- Off grade Cut-off Grade Optimization for Maximizing the Output Rate [Volume 46, Issue 2, 2012, Pages 157-162]
  • Mechanical Behavior The effects of temperature on mechanical properties of rocks [Volume 54, Issue 2, 2020, Pages 147-152]
  • Mechanization Potential Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran [Volume 53, Issue 1, 2019, Pages 15-23]
  • Mechanized tunneling Geological Hazards analysis in Urban Tunneling by EPB Machine (Case study: Tehran subway line 7 tunnel) [Volume 50, Issue 1, 2016, Pages 23-36]
  • Mechanized tunneling Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Meshing A new conforming mesh generator for three-dimensional discrete fracture networks [Volume 53, Issue 1, 2019, Pages 67-78]
  • Metaheuristic algorithm Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
  • MGS Application of gravity separators for enrichment of South Chah-Palang tungsten ore [Volume 50, Issue 1, 2016, Pages 1-12]
  • Microscopic inclination An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
  • Microscopic properties Alteration dependent physical-mechanical properties of quartz-diorite building stones [Volume 50, Issue 2, 2016, Pages 195-200]
  • Miduk Copper A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample [Volume 46, Issue 2, 2012, Pages 133-140]
  • Miduk copper concentrator A method to determine the ball filling, in Miduk copper concentrator SAG mill [Volume 46, Issue 1, 2012, Pages 15-19]
  • Miduk copper mine Stability Analysis and Stabilization of Miduk Heap Leaching Structure, Iran [Volume 47, Issue 1, 2013, Pages 1-11]
  • Mineral Potential Mapping A hybrid-based clustering algorithm for targeting porphyry copper mineralization at Chahargonbad district in SE Iran [(Articles in Press)]
  • Mineral Resource Evaluation Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Minimum factor of Safety Optimization of horizontal drain dimensions in homogeneous earth dams using neural network [Volume 54, Issue 2, 2020, Pages 173-177]
  • Minimum/maximum autocorrelation factors Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Mining slopes Fundamental techniques for reducing risk associated with instabilities in mining slopes [Volume 46, Issue 1, 2012, Pages 43-55]
  • Mixture design Selective separation of galena and sphalerite from pyrite-rich lead-zinc ores: A case study of the Kooshk mine, Central Iran [Volume 53, Issue 1, 2019, Pages 43-50]
  • Mixture plan. UCS test A laboratory study on mix design to properly resemble a jointed brittle rock [Volume 50, Issue 2, 2016, Pages 201-210]
  • Mo and Re extraction Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
  • Mogok Metamorphic Belt Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Monograms Flexural Toppling Failure in Rock Slopes: From Theory to Applications [Volume 46, Issue 1, 2012, Pages 21-32]
  • Monte Carlo simulation Stability assessment of the Farrokhi earth embankment dam using the pseudo-static and deformation based methods [Volume 49, Issue 2, 2015, Pages 205-220]
  • Monte Carlo simulation Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
  • Mud volcano Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
  • Multidimensional Scaling Accuracy evaluation of different statistical and geostatistical censored data imputation approaches (Case study: Sari Gunay gold deposit) [Volume 50, Issue 1, 2016, Pages 49-60]
  • Multifractal model Identification of Ti- anomaly in stream sediment geochemistry using of stepwise factor analysis and multifractal model in Delijan district, Iran [Volume 50, Issue 1, 2016, Pages 77-95]
  • Multi-Layer Perceptron Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
  • Multi-layer Perceptron Model Application of Artificial Neural Network for Stability Analysis of Undercut Slopes [(Articles in Press)]
  • Multivariate simulation Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Mutual information Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]

N

  • Native gold Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Network Optimization A New Algorithm for Determining Ultimate Pit Limits Based on Network Optimization [Volume 47, Issue 2, 2013, Pages 129-137]
  • Neural Network A Laboratory Study on Stress Dependency of Joint Transmissivity and its Modeling with Neural Networks, Fuzzy Method and Regression Analysis [Volume 46, Issue 1, 2012, Pages 57-66]
  • Neural Network Estimation of the Ampere Consumption of Dimension Stone Sawing Machine Using of Artificial Neural Networks [Volume 50, Issue 1, 2016, Pages 121-130]
  • Newmark displacement analysis Comparison of pseudo-static, Newmark and dynamic response analysis of the final pit wall of Sungun copper mine [Volume 52, Issue 2, 2018, Pages 141-147]
  • Niayesh tunnel On the selection of an appropriate excavation pattern for urban tunnels with big cross-section: A case study [Volume 49, Issue 2, 2015, Pages 297-307]
  • Nonlinear model A nonlinear model to estimate vibration frequencies in surface mines [Volume 54, Issue 2, 2020, Pages 167-171]
  • Non-monetary value A non-monetary valuation system for open-pit mine design [Volume 54, Issue 2, 2020, Pages 135-145]
  • Non- Orthogonal Interfaces Lattice numerical simulations of hydraulic fractures interacting with oblique natural interfaces [Volume 53, Issue 1, 2019, Pages 83-89]
  • Non-persistent joint A laboratory study on mix design to properly resemble a jointed brittle rock [Volume 50, Issue 2, 2016, Pages 201-210]
  • Numerical analysis DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
  • Numerical Method Pillar Design in the Hard Rock Mines of South Africa [Volume 46, Issue 2, 2012, Pages 163-191]
  • Numerical Method Numerical Investigation of the Impact of Geomechanical Parameters of Formations on Well Integrity of One of the Iranian Oil Fields [Volume 54, Issue 2, 2020, Pages 179-183]
  • Numerical Modeling Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
  • Numerical Modeling A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
  • Numerical Simulations Lattice numerical simulations of hydraulic fractures interacting with oblique natural interfaces [Volume 53, Issue 1, 2019, Pages 83-89]

O

  • Open cut mining Hydrogeological Issues Concerning the Thar Lignite Prospect [Volume 46, Issue 2, 2012, Pages 141-156]
  • Open-pit Robustness price of open-pit mine production scheduling [Volume 54, Issue 2, 2020, Pages 117-122]
  • Open Pit Open pit limit optimization using dijkstra’s algorithm [Volume 54, Issue 1, 2020, Pages 39-43]
  • Open pit design A non-monetary valuation system for open-pit mine design [Volume 54, Issue 2, 2020, Pages 135-145]
  • Open-Pit Mine Cut-off Grade Optimization for Maximizing the Output Rate [Volume 46, Issue 2, 2012, Pages 157-162]
  • Open-Pit Mine A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
  • Open pit mine production scheduling An imperialist competitive algorithm for solving the production scheduling problem in open pit mine [Volume 50, Issue 1, 2016, Pages 131-143]
  • Open pit mine transportation Comparison of the various dispatching strategies for truck-shovel productivity optimization in open pit mines [Volume 53, Issue 2, 2019, Pages 193-202]
  • Open pit mining A New Algorithm for Determining Ultimate Pit Limits Based on Network Optimization [Volume 47, Issue 2, 2013, Pages 129-137]
  • Open pit mining Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
  • Open pit mining Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Operating environment Tire demand planning based on reliability and operating environment [Volume 50, Issue 2, 2016, Pages 239-248]
  • Operational variables The Flotation System Optimization in Alborz-Sharghi Coal Washing Plant; A Laboratory Study [Volume 49, Issue 1, 2015, Pages 19-32]
  • Optimal Selection Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran [Volume 53, Issue 1, 2019, Pages 15-23]
  • Optimization Introducing a User-friendly Computer Program for Determining the Location of Underground Stopes [Volume 54, Issue 1, 2020, Pages 77-85]
  • Optimization A non-monetary valuation system for open-pit mine design [Volume 54, Issue 2, 2020, Pages 135-145]
  • Optimization Optimization of horizontal drain dimensions in homogeneous earth dams using neural network [Volume 54, Issue 2, 2020, Pages 173-177]
  • Optimization. Dynamic Programing Open pit limit optimization using dijkstra’s algorithm [Volume 54, Issue 1, 2020, Pages 39-43]
  • Optimization techniques Recent developments in configuration design and optimization of mineral separation circuits; A Review [Volume 53, Issue 1, 2019, Pages 51-61]
  • Optimum model Two-dimensional upscaling of reservoir data using adaptive bandwidth in the kernel function [Volume 54, Issue 2, 2020, Pages 123-128]
  • Optimum recovery The Flotation System Optimization in Alborz-Sharghi Coal Washing Plant; A Laboratory Study [Volume 49, Issue 1, 2015, Pages 19-32]
  • Opto-geometric parameters An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
  • Ordinary Stone Column Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
  • Ore Deposits Mineral resources and geo-engineering [Volume 49, Issue 2, 2015, Pages 221-233]
  • Orthogonal Fractures Lattice numerical simulations of hydraulic fractures interacting with oblique natural interfaces [Volume 53, Issue 1, 2019, Pages 83-89]
  • Output Rate Cut-off Grade Optimization for Maximizing the Output Rate [Volume 46, Issue 2, 2012, Pages 157-162]

P

  • Pabdeh Formation Application of Discriminant Analysis for Studying the Source Rock Potential of Probable Formations in the Lorestan Basin, Iran [Volume 48, Issue 1, 2014, Pages 31-54]
  • Pahne Kola Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
  • Parametric Study Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
  • Particle size An improved model of continuous leaching systems using segregation approach [Volume 54, Issue 2, 2020, Pages 129-133]
  • Particle Swarm Optimization The application of Committee machine with particle swarm optimization to the assessment of permeability based on thin section image analysis [Volume 52, Issue 2, 2018, Pages 177-185]
  • Particle Swarm Optimization (PSO) Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries [Volume 52, Issue 1, 2018, Pages 31-36]
  • Parvadeh Investigating the effect of fractures on unusual gas emission in coal mines; case study of Parvadeh coal mine, Iran [Volume 50, Issue 2, 2016, Pages 163-168]
  • Peak particle velocity Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Pellet The effect of chemical composition and burning temperature on pellet quality [Volume 54, Issue 1, 2020, Pages 27-32]
  • Permeability The application of Committee machine with particle swarm optimization to the assessment of permeability based on thin section image analysis [Volume 52, Issue 2, 2018, Pages 177-185]
  • PFC2D DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
  • PGA Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
  • Phanerochaete chrysosporium Bio-Remediation of Acid Mine Drainage in the Sarcheshmeh Porphyry Copper Mine by Fungi: Batch and Fixed Bed Process [Volume 46, Issue 1, 2012, Pages 87-103]
  • Phosphate Selective leaching of low-grade phosphate ore using a mixture of organic acids [Volume 54, Issue 1, 2020, Pages 65-70]
  • Physical Modeling Physical and theoretical modeling of rock slopes against block-flexure toppling failure [Volume 49, Issue 2, 2015, Pages 155-171]
  • Pillar burst The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas [Volume 52, Issue 2, 2018, Pages 105-117]
  • Pillar design The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas [Volume 52, Issue 2, 2018, Pages 105-117]
  • Pillar Strength Pillar Design in the Hard Rock Mines of South Africa [Volume 46, Issue 2, 2012, Pages 163-191]
  • Point estimate method (PEM) Probabilistic design: The future of rock engineering [Volume 46, Issue 1, 2012, Pages 33-42]
  • Point of inflection Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Porosity A Comparative Study between a Pseudo-Forward Equation (PFE) and Intelligence Methods for the Characterization of the North Sea Reservoir [Volume 48, Issue 2, 2014, Pages 173-190]
  • Porphyry copper A hybrid-based clustering algorithm for targeting porphyry copper mineralization at Chahargonbad district in SE Iran [(Articles in Press)]
  • Porphyry copper deposit Accounting for secondary variable for the classification of mineral resources using co-kriging technique; a Case study of Sarcheshmeh porphyry copper deposit [Volume 46, Issue 1, 2012, Pages 67-80]
  • Predictive equation Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Principal Component Analysis (PCA) Application of fractal modeling and PCA method for hydrothermal alteration mapping in the Saveh area (Central Iran) based on ASTER multispectral data [Volume 50, Issue 1, 2016, Pages 37-48]
  • Probability density function Application of tests of goodness of fit in determining the probability density function for spacing of steel sets in tunnel support system [Volume 49, Issue 2, 2015, Pages 187-203]
  • Production Planning Cut-off Grade Optimization for Maximizing the Output Rate [Volume 46, Issue 2, 2012, Pages 157-162]
  • Production Planning Introducing a User-friendly Computer Program for Determining the Location of Underground Stopes [Volume 54, Issue 1, 2020, Pages 77-85]
  • Production Scheduling A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
  • Production Scheduling Robustness price of open-pit mine production scheduling [Volume 54, Issue 2, 2020, Pages 117-122]
  • Programming aspects Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
  • PROMETHEE Method Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran [Volume 53, Issue 1, 2019, Pages 15-23]
  • Proportional hazard model Tire demand planning based on reliability and operating environment [Volume 50, Issue 2, 2016, Pages 239-248]
  • Proximate analysis Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
  • Pulp potential Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
  • Pyrite Bioleaching of a low grade sphalerite concentrate produced from flotation tailings [Volume 50, Issue 2, 2016, Pages 169-173]
  • Pyrite The role of catalyst in the passivation of chalcopyrite during leaching [Volume 51, Issue 1, 2017, Pages 91-96]
  • Pyrite Selective separation of galena and sphalerite from pyrite-rich lead-zinc ores: A case study of the Kooshk mine, Central Iran [Volume 53, Issue 1, 2019, Pages 43-50]

Q

  • Q system Assessments of applicability of Q and RMi systems in binary tunnels of Bakhtiari dam_ Iran [Volume 47, Issue 1, 2013, Pages 33-40]
  • Quality-tonnage curves Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Quartz Investigating the effects of particle size and dosage of talc nanoparticles as a novel solid collector in quartz flotation [Volume 53, Issue 1, 2019, Pages 1-6]
  • Q-Value Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system [Volume 51, Issue 2, 2017, Pages 133-138]

R

  • R70 Test Method Effect of maceral content on tendency of spontaneous coal combustion using the R70 method [Volume 54, Issue 2, 2020, Pages 93-99]
  • Rate of flotation Determination of the difference in recovery and kinetics of various size fractions of gilsonite in rougher and cleaner flotation processes [Volume 53, Issue 1, 2019, Pages 25-31]
  • RCC The Use of Robust Factor Analysis of Compositional Geochemical Data for the Recognition of the Target Area in Khusf 1:100000 Sheet, South Khorasan, Iran [Volume 48, Issue 2, 2014, Pages 191-199]
  • Regression Estimation of xanthate decomposition percentage as a function of pH, temperature and time by least squares regression and adaptive neuro-fuzzy inference system [Volume 53, Issue 2, 2019, Pages 157-163]
  • Regression and ANFIS methods Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
  • Regression-kriging Three-Dimensional Geostatistical Analysis of Rock Fracture Roughness and Its Degradation with Shearing [Volume 47, Issue 2, 2013, Pages 163-179]
  • Regression modelling. Bayesian Regularization Neural Network A laboratory study on mix design to properly resemble a jointed brittle rock [Volume 50, Issue 2, 2016, Pages 201-210]
  • Residence Time An improved model of continuous leaching systems using segregation approach [Volume 54, Issue 2, 2020, Pages 129-133]
  • Resource classification Accounting for secondary variable for the classification of mineral resources using co-kriging technique; a Case study of Sarcheshmeh porphyry copper deposit [Volume 46, Issue 1, 2012, Pages 67-80]
  • Restructuring Managing in situ gold concentrations in placers [Volume 49, Issue 2, 2015, Pages 235-243]
  • Retaining walls DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
  • Retaining walls Soil Arching Behind Retaining Walls under Active Translation Mode: Review and New Insights [Volume 52, Issue 2, 2018, Pages 131-140]
  • Reverse leaching Selective leaching of low-grade phosphate ore using a mixture of organic acids [Volume 54, Issue 1, 2020, Pages 65-70]
  • Rey Industrial Area An Assessment of Factors Affecting Reactive Transport of Biodegradable BTEX in an Unconfined Aquifer System, Tehran Oil Refinery, Iran [Volume 46, Issue 2, 2012, Pages 193-208]
  • Rigid Stone Column Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
  • Risk analysis A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
  • Risk Management Fundamental techniques for reducing risk associated with instabilities in mining slopes [Volume 46, Issue 1, 2012, Pages 43-55]
  • RMi system Assessments of applicability of Q and RMi systems in binary tunnels of Bakhtiari dam_ Iran [Volume 47, Issue 1, 2013, Pages 33-40]
  • Roasting A Study on the Recovery of Titanium Dioxide from a Blast Furnace Slag, Using Roasting and Acid Leaching [Volume 53, Issue 2, 2019, Pages 175-181]
  • Robust factor analysis CRFA-CRBM: a hybrid technique for anomaly recognition in regional geochemical exploration; case study: Dehsalm area, east of Iran [Volume 54, Issue 1, 2020, Pages 33-38]
  • Rock engineering Probabilistic design: The future of rock engineering [Volume 46, Issue 1, 2012, Pages 33-42]
  • Rock Engineering System Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
  • Rock engineering systems (RES) Applying rock engineering systems (RES) approach to evaluate and classify the coal spontaneous combustion potential in Eastern Alborz coal mines [Volume 47, Issue 2, 2013, Pages 115-127]
  • Rock fracture dynamic toughness Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
  • Rock fracture roughness Three-Dimensional Geostatistical Analysis of Rock Fracture Roughness and Its Degradation with Shearing [Volume 47, Issue 2, 2013, Pages 163-179]
  • Rock mass A model for estimation of stress-dependent deformation modulus of rock mass [Volume 53, Issue 1, 2019, Pages 63-67]
  • Rock Physics Rock physical modeling enhancement in hydrocarbon reservoirs using Choquet fuzzy integral fusion approach [Volume 54, Issue 2, 2020, Pages 101-108]
  • Rock Slope Flexural Toppling Failure in Rock Slopes: From Theory to Applications [Volume 46, Issue 1, 2012, Pages 21-32]
  • Rock Slope Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]

S

  • Sabzkuh tunnel Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Safety Factors Effects of Weak Layer Angle and Thickness on the Stability of Rock Slopes [Volume 50, Issue 1, 2016, Pages 97-110]
  • Sagaing Fault Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • SAG Mill A method to determine the ball filling, in Miduk copper concentrator SAG mill [Volume 46, Issue 1, 2012, Pages 15-19]
  • Salt rock Effect of solid impurity on creep behavior of salt rocks of the Hormoz formation [Volume 54, Issue 2, 2020, Pages 161-166]
  • Sand Slope Experimental Study of Waste Tire-Reinforced Sand Slope [Volume 53, Issue 2, 2019, Pages 183-191]
  • Sangan mine Characterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation [Volume 53, Issue 2, 2019, Pages 111-116]
  • Sarcheshmeh Bio-Remediation of Acid Mine Drainage in the Sarcheshmeh Porphyry Copper Mine by Fungi: Batch and Fixed Bed Process [Volume 46, Issue 1, 2012, Pages 87-103]
  • Sarcheshmeh copper mine Design and implementation of heavy metal prediction in acid mine drainage using multi-output adaptive neuro-fuzzy inference systems (ANFIS) - a case study [Volume 54, Issue 1, 2020, Pages 59-64]
  • Saveh Application of fractal modeling and PCA method for hydrothermal alteration mapping in the Saveh area (Central Iran) based on ASTER multispectral data [Volume 50, Issue 1, 2016, Pages 37-48]
  • Sawing machines Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries [Volume 52, Issue 1, 2018, Pages 31-36]
  • Sawing Process Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
  • Schmidt hammer hardness Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
  • Sechahoon Iron Mine Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method [Volume 50, Issue 1, 2016, Pages 145-156]
  • Secondary variable Accounting for secondary variable for the classification of mineral resources using co-kriging technique; a Case study of Sarcheshmeh porphyry copper deposit [Volume 46, Issue 1, 2012, Pages 67-80]
  • Sedimentary model Investigating the Effect of Sedimentary Basin on Consolidation of Kerman Fine-Grained Soils [Volume 52, Issue 2, 2018, Pages 125-129]
  • Segment Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
  • Segment Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Seismic retrofitting Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Seismic source mechanism The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas [Volume 52, Issue 2, 2018, Pages 105-117]
  • Self-Consistent Approximation model Rock physical modeling enhancement in hydrocarbon reservoirs using Choquet fuzzy integral fusion approach [Volume 54, Issue 2, 2020, Pages 101-108]
  • SEM The role of catalyst in the passivation of chalcopyrite during leaching [Volume 51, Issue 1, 2017, Pages 91-96]
  • SEM The effect of chemical composition and burning temperature on pellet quality [Volume 54, Issue 1, 2020, Pages 27-32]
  • Sensitivity analysis Numerical Modelling of the Segmental Lining of Underground Structures [Volume 48, Issue 2, 2014, Pages 147-157]
  • Sensitivity Analysis An Assessment of Factors Affecting Reactive Transport of Biodegradable BTEX in an Unconfined Aquifer System, Tehran Oil Refinery, Iran [Volume 46, Issue 2, 2012, Pages 193-208]
  • Separation efficiency Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
  • Sequential excavation On the selection of an appropriate excavation pattern for urban tunnels with big cross-section: A case study [Volume 49, Issue 2, 2015, Pages 297-307]
  • Sequential Gaussian Simulation (SGS) Spatial variability analysis of subsurface soil in Mashhad city, NE Iran [Volume 50, Issue 2, 2016, Pages 219-229]
  • Sequential Gaussian Simulation (SGSim) Hydrograph Modeling Using SGSim: A Case Study of Behbahan Aquifer, Southwest of Iran [Volume 47, Issue 2, 2013, Pages 103-113]
  • Settlement trough width (STW) Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Seymareh and Aghbolagh dams Predicting the Occurrence of Hydraulic Fracture in Grouting Operations Based on the Pressure in the Penetrated Cement Grout [Volume 51, Issue 2, 2017, Pages 113-118]
  • SGEMS Application of Geostatistical Modelling to Study the Exploration Adequacy of Uniaxial Compressive Strength of Intact Rock alongthe Behesht-Abad Tunnel Route [Volume 48, Issue 2, 2014, Pages 127-137]
  • Shahghasem dam Internal erosion under spillway rested on an embankment dam [Volume 49, Issue 2, 2015, Pages 269-279]
  • Shear Strength Parameters Stability Analysis and Stabilization of Miduk Heap Leaching Structure, Iran [Volume 47, Issue 1, 2013, Pages 1-11]
  • Shear wave velocity Hybrid ANFIS with ant colony optimization algorithm for prediction of shear wave velocity from a carbonate reservoir in Iran [Volume 50, Issue 2, 2016, Pages 231-238]
  • Shurijeh formation Thermal Analysis: A Complementary Method to Study the Shurijeh Clay Minerals [Volume 49, Issue 1, 2015, Pages 33-45]
  • Shur River Design and implementation of heavy metal prediction in acid mine drainage using multi-output adaptive neuro-fuzzy inference systems (ANFIS) - a case study [Volume 54, Issue 1, 2020, Pages 59-64]
  • Sieve analysis Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
  • Sillimanite Experimental study of lead (II) removal using polymorphous silica adsorbents [Volume 53, Issue 1, 2019, Pages 7-13]
  • Simple co-kriging Accounting for secondary variable for the classification of mineral resources using co-kriging technique; a Case study of Sarcheshmeh porphyry copper deposit [Volume 46, Issue 1, 2012, Pages 67-80]
  • Singularity Integration of singularity and zonality methods for prospectivity map of blind mineralization [Volume 50, Issue 2, 2016, Pages 189-194]
  • Site selection Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
  • Size distribution Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Slope The Effects of Strength Parameters on Slope Safety Factor in 2D & 3D Analyses using Numerical Methods [Volume 54, Issue 1, 2020, Pages 71-75]
  • Slope stability Uncertainties and Complexities of the Geological Model in Slope Stability: a Case Study of Sabzkuh Tunnel [Volume 48, Issue 1, 2014, Pages 69-79]
  • Slope stability Effects of Weak Layer Angle and Thickness on the Stability of Rock Slopes [Volume 50, Issue 1, 2016, Pages 97-110]
  • Slope stability Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Sodium sulphide Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
  • Soil-Pile Interaction Numerical simulation of liquefaction susceptibility of soil interacting by single pile [Volume 49, Issue 1, 2015, Pages 47-56]
  • Soil Stabilization Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Soil Strength Behaviour Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Soil structure Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Solid collector Investigating the effects of particle size and dosage of talc nanoparticles as a novel solid collector in quartz flotation [Volume 53, Issue 1, 2019, Pages 1-6]
  • Spare part Tire demand planning based on reliability and operating environment [Volume 50, Issue 2, 2016, Pages 239-248]
  • Sparsity constraints 3D Inversion of Magnetic Data through Wavelet based Regularization Method [Volume 49, Issue 1, 2015, Pages 1-18]
  • Spatial cross-correlation Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Spatial structure Three-Dimensional Geostatistical Analysis of Rock Fracture Roughness and Its Degradation with Shearing [Volume 47, Issue 2, 2013, Pages 163-179]
  • Specific Ampere Draw Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
  • Spectral angle mapper Integration of support vector machines for hydrothermal alteration mapping using ASTER data – case study: the northwestern part of the Kerman Cenozoic Magmatic Arc, Iran [Volume 54, Issue 1, 2020, Pages 45-50]
  • Sphalerite concentrate Bioleaching of a low grade sphalerite concentrate produced from flotation tailings [Volume 50, Issue 2, 2016, Pages 169-173]
  • SplitDesktop Fragmentation measurement using image processing [Volume 50, Issue 2, 2016, Pages 211-218]
  • Spontaneous Combustion of Coal Effect of maceral content on tendency of spontaneous coal combustion using the R70 method [Volume 54, Issue 2, 2020, Pages 93-99]
  • SRM/DEM/MCS A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
  • SRM/DEM/PEM A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
  • Stability Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
  • Stabilization Stability Analysis and Stabilization of Miduk Heap Leaching Structure, Iran [Volume 47, Issue 1, 2013, Pages 1-11]
  • Statistical Analysis Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
  • Statistical Analysis Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Statistical Design Coal Recycling from Tailings using Flotation with 2-Level Experimental Design Techniques [Volume 46, Issue 1, 2012, Pages 1-13]
  • Stepwise factor analysis Identification of Ti- anomaly in stream sediment geochemistry using of stepwise factor analysis and multifractal model in Delijan district, Iran [Volume 50, Issue 1, 2016, Pages 77-95]
  • Stope Layout Optimizer Introducing a User-friendly Computer Program for Determining the Location of Underground Stopes [Volume 54, Issue 1, 2020, Pages 77-85]
  • Stratified Cox regression model Tire demand planning based on reliability and operating environment [Volume 50, Issue 2, 2016, Pages 239-248]
  • Stream Sediment The Use of Robust Factor Analysis of Compositional Geochemical Data for the Recognition of the Target Area in Khusf 1:100000 Sheet, South Khorasan, Iran [Volume 48, Issue 2, 2014, Pages 191-199]
  • Stress A model for estimation of stress-dependent deformation modulus of rock mass [Volume 53, Issue 1, 2019, Pages 63-67]
  • Stress Dependent Transmissivity A Laboratory Study on Stress Dependency of Joint Transmissivity and its Modeling with Neural Networks, Fuzzy Method and Regression Analysis [Volume 46, Issue 1, 2012, Pages 57-66]
  • Stress-Life method Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Subsurface soil Spatial variability analysis of subsurface soil in Mashhad city, NE Iran [Volume 50, Issue 2, 2016, Pages 219-229]
  • Sulfuric acid A Study on the Recovery of Titanium Dioxide from a Blast Furnace Slag, Using Roasting and Acid Leaching [Volume 53, Issue 2, 2019, Pages 175-181]
  • Sungun copper mine Comparison of pseudo-static, Newmark and dynamic response analysis of the final pit wall of Sungun copper mine [Volume 52, Issue 2, 2018, Pages 141-147]
  • Supply Chain Management Productivity Improvement in a Steel Industry using Supply Chain Management Technique [Volume 47, Issue 1, 2013, Pages 51-59]
  • Support System Assessments of applicability of Q and RMi systems in binary tunnels of Bakhtiari dam_ Iran [Volume 47, Issue 1, 2013, Pages 33-40]
  • Support vector machine Integration of support vector machines for hydrothermal alteration mapping using ASTER data – case study: the northwestern part of the Kerman Cenozoic Magmatic Arc, Iran [Volume 54, Issue 1, 2020, Pages 45-50]
  • Surface properties Flotation of zinc silicate ore: A focus on effective parameters, synergistic effect of mixed cationic collectors and its mechanism [Volume 53, Issue 1, 2019, Pages 33-41]
  • Sustainable Development Sustainable Development Assessment in Underground Coal mining by Developing a Novel Index [(Articles in Press)]
  • SVM High performance of the support vector machine in classifying hyperspectral data using a limited dataset [Volume 49, Issue 2, 2015, Pages 253-268]
  • Synergistic effect of mixed collectors Flotation of zinc silicate ore: A focus on effective parameters, synergistic effect of mixed cationic collectors and its mechanism [Volume 53, Issue 1, 2019, Pages 33-41]

T

  • Taguchi A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
  • Taguchi’s method Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Tailing Bioleaching of a low grade sphalerite concentrate produced from flotation tailings [Volume 50, Issue 2, 2016, Pages 169-173]
  • Tailing damp Proposing a seven-parameter kinetics model for predicting cerussite flotation recovery [Volume 54, Issue 1, 2020, Pages 1-13]
  • Tailings Flotation Coal Recycling from Tailings using Flotation with 2-Level Experimental Design Techniques [Volume 46, Issue 1, 2012, Pages 1-13]
  • Talc nanoparticles Investigating the effects of particle size and dosage of talc nanoparticles as a novel solid collector in quartz flotation [Volume 53, Issue 1, 2019, Pages 1-6]
  • Tarom mine A New Analytical Solution for Determination of Acceptable Overall settlement of Heap Leaching Structures Foundation [Volume 50, Issue 1, 2016, Pages 111-120]
  • Tehran subway line 7 Geological Hazards analysis in Urban Tunneling by EPB Machine (Case study: Tehran subway line 7 tunnel) [Volume 50, Issue 1, 2016, Pages 23-36]
  • Temeng model Comparison of the various dispatching strategies for truck-shovel productivity optimization in open pit mines [Volume 53, Issue 2, 2019, Pages 193-202]
  • Tensile Strength Analytical Solution for Stress Field and Intensity Factor in CSTBD under Mixed Mode Conditions [Volume 48, Issue 1, 2014, Pages 55-68]
  • TGARCH Modeling and prediction of time-series of monthly copper prices [Volume 53, Issue 1, 2019, Pages 91-97]
  • Thar lignite mine Hydrogeological Issues Concerning the Thar Lignite Prospect [Volume 46, Issue 2, 2012, Pages 141-156]
  • Thermal modelling Application of Thermal Modelling for Geochemical Characterization of Gadvan Formation, Persian Gulf, Iran [Volume 48, Issue 2, 2014, Pages 137-146]
  • Thermoporoelasticity Coupling Geomechanics and Transport in Naturally Fractured Reservoirs [Volume 46, Issue 2, 2012, Pages 105-131]
  • Thickener The Effects of Ore Properties on the Characterization of Suspension in Settling and Compression [Volume 48, Issue 1, 2014, Pages 101-114]
  • Thickener Performance improvement of the Sarcheshmeh Copper Complex Cu-Mo thickener using a vane type feedwell [Volume 53, Issue 1, 2019, Pages 79-82]
  • Thin section image An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
  • THM Coupling Coupling Geomechanics and Transport in Naturally Fractured Reservoirs [Volume 46, Issue 2, 2012, Pages 105-131]
  • Ti- anomaly Identification of Ti- anomaly in stream sediment geochemistry using of stepwise factor analysis and multifractal model in Delijan district, Iran [Volume 50, Issue 1, 2016, Pages 77-95]
  • Titanium dioxide A Study on the Recovery of Titanium Dioxide from a Blast Furnace Slag, Using Roasting and Acid Leaching [Volume 53, Issue 2, 2019, Pages 175-181]
  • Toppling Failure Flexural Toppling Failure in Rock Slopes: From Theory to Applications [Volume 46, Issue 1, 2012, Pages 21-32]
  • Torque Performance improvement of the Sarcheshmeh Copper Complex Cu-Mo thickener using a vane type feedwell [Volume 53, Issue 1, 2019, Pages 79-82]
  • Transition elements Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
  • Travertine The effects of temperature on mechanical properties of rocks [Volume 54, Issue 2, 2020, Pages 147-152]
  • Truck dispatching Comparison of the various dispatching strategies for truck-shovel productivity optimization in open pit mines [Volume 53, Issue 2, 2019, Pages 193-202]
  • Truncated Gaussian Simulation Application of truncated gaussian simulation to ore-waste boundary modeling of Golgohar iron deposit [Volume 50, Issue 2, 2016, Pages 175-181]

U

  • UDEC Effects of statistical distribution of joint trace length on the stability of tunnel excavated in jointed rock mass [Volume 49, Issue 2, 2015, Pages 289-296]
  • UDEC Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]
  • Ultimate pit A non-monetary valuation system for open-pit mine design [Volume 54, Issue 2, 2020, Pages 135-145]
  • Uncertainty Wavelet Neural Network: A Hybrid Method in Modeling Heterogeneous Reservoirs [Volume 53, Issue 2, 2019, Pages 203-211]
  • Uncertainty modeling Application of truncated gaussian simulation to ore-waste boundary modeling of Golgohar iron deposit [Volume 50, Issue 2, 2016, Pages 175-181]
  • Undercut Slope Application of Artificial Neural Network for Stability Analysis of Undercut Slopes [(Articles in Press)]
  • Undercut Slopes A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
  • Underground coal mining Sustainable Development Assessment in Underground Coal mining by Developing a Novel Index [(Articles in Press)]
  • Underground Mining Introducing a User-friendly Computer Program for Determining the Location of Underground Stopes [Volume 54, Issue 1, 2020, Pages 77-85]
  • Uniaxial compressive strength Application of Geostatistical Modelling to Study the Exploration Adequacy of Uniaxial Compressive Strength of Intact Rock alongthe Behesht-Abad Tunnel Route [Volume 48, Issue 2, 2014, Pages 127-137]
  • Uniaxial compressive strength Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
  • Unusual methane gas emission Investigating the effect of fractures on unusual gas emission in coal mines; case study of Parvadeh coal mine, Iran [Volume 50, Issue 2, 2016, Pages 163-168]
  • Upscaling Wavelet Neural Network: A Hybrid Method in Modeling Heterogeneous Reservoirs [Volume 53, Issue 2, 2019, Pages 203-211]
  • Upscaling Two-dimensional upscaling of reservoir data using adaptive bandwidth in the kernel function [Volume 54, Issue 2, 2020, Pages 123-128]

V

  • Validating example Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
  • Vane Feedwell Performance improvement of the Sarcheshmeh Copper Complex Cu-Mo thickener using a vane type feedwell [Volume 53, Issue 1, 2019, Pages 79-82]
  • Variography Three-Dimensional Geostatistical Analysis of Rock Fracture Roughness and Its Degradation with Shearing [Volume 47, Issue 2, 2013, Pages 163-179]
  • Vibracord seismograph Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
  • Voronoi model Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]

W

  • Waste Tires Experimental Study of Waste Tire-Reinforced Sand Slope [Volume 53, Issue 2, 2019, Pages 183-191]
  • Water recovery index A new method for determination of frothability of frothers by using water recovery measurement [Volume 50, Issue 2, 2016, Pages 249-255]
  • Wavelet transform Proposing New Methods to Enhance the Low-Resolution Simulated GPR Responses in the Frequency and Wavelet Domains [Volume 48, Issue 2, 2014, Pages 159-172]
  • Wavelet transform 3D Inversion of Magnetic Data through Wavelet based Regularization Method [Volume 49, Issue 1, 2015, Pages 1-18]
  • Weak Layer Effects of Weak Layer Angle and Thickness on the Stability of Rock Slopes [Volume 50, Issue 1, 2016, Pages 97-110]
  • Weak Partings Pillar Design in the Hard Rock Mines of South Africa [Volume 46, Issue 2, 2012, Pages 163-191]
  • Wear rate Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
  • Well integrity Numerical Investigation of the Impact of Geomechanical Parameters of Formations on Well Integrity of One of the Iranian Oil Fields [Volume 54, Issue 2, 2020, Pages 179-183]
  • WKF Restoring the past glory of Diamond Mining in south India- A plausible case of diamondiferous Wajrakarur kimberlite pipe clusters with geochemical evidences [Volume 53, Issue 2, 2019, Pages 99-109]
  • Work Index A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample [Volume 46, Issue 2, 2012, Pages 133-140]

X

  • Xanthate Estimation of xanthate decomposition percentage as a function of pH, temperature and time by least squares regression and adaptive neuro-fuzzy inference system [Volume 53, Issue 2, 2019, Pages 157-163]
  • X-ray diffraction (XRD) Thermal Analysis: A Complementary Method to Study the Shurijeh Clay Minerals [Volume 49, Issue 1, 2015, Pages 33-45]
  • X-ray fluorescence (XRF) Thermal Analysis: A Complementary Method to Study the Shurijeh Clay Minerals [Volume 49, Issue 1, 2015, Pages 33-45]
  • Xu-Payne model Rock physical modeling enhancement in hydrocarbon reservoirs using Choquet fuzzy integral fusion approach [Volume 54, Issue 2, 2020, Pages 101-108]

Y

  • Young’s modulus A model for estimation of stress-dependent deformation modulus of rock mass [Volume 53, Issue 1, 2019, Pages 63-67]

Z

  • Zemestan Yourt coal mine Sustainable Development Assessment in Underground Coal mining by Developing a Novel Index [(Articles in Press)]
  • Zinc-silicate minerals Flotation of zinc silicate ore: A focus on effective parameters, synergistic effect of mixed cationic collectors and its mechanism [Volume 53, Issue 1, 2019, Pages 33-41]