Incorporating grade uncertainty into open-pit long-term production planning using loss and profit functions

Document Type : Research Paper

Authors

1 Tarbiat Modares University

2 Tarbiat Modares University Modarres

10.22059/ijmge.2023.360143.595072

Abstract

Long-term production planning for open-pit mines is recognised as one of the vital decision-making issues in open-pit mining operations. In addition, the ore grade is one of the most significant sources of uncertainty in a mining operation, as it classified run-of-mine material into ore and waste. In the classical approach, the destination of mining blocks is determined by comparing the estimated grade with a pre-determined cut-off grade. However, the uncertainty of material grade dramatically affects production planning. In this paper, a novel model was developed based on the idea of simulating the grade to incorporate the risk of grade uncertainty. In the proposed model, the economic consequences of the assigned destination are calculated using the profit and loss functions and they are integrated with the production scheduling. The proposed production planning was implemented in an iron ore mine, and the results were discussed for classical, loss, and profit models. Results show that the net present value increases by 3.64% by implementing the profit function. In contrast, the loss function method reduces the net present value by 2.23% compared to the classic model. This happens because the amount of ore class is increased by 7.46% using the profit function method and decreased by 2.49% using the loss function method. Additionally, the coefficient of variation, as an index of uncertainty, was investigated. The results show that the loss function approach attempts to extract more reliable blocks in the early years and postpone the high-uncertain blocks to the later years of the production.

Keywords

Main Subjects

References

[1] Mousavi, A., E. Kozan, and S.Q. Liu, Open-pit block sequencing optimization: A Abbaszadeh, M., Fujii, H., and Fujimoto, F., 1996, Permeability Prediction by Hydraulic Flow Units—Theory and Applications: SPE Formation Evaluation, v. 11, no. 04, p. 263-271.
[2] Aguilera, R., 2002, Incorporating Capillary Pressure, Pore Throat Aperture Radii, Height above Free-Water Table, and Winland r35 Values on Pickett Plots: AAPG Bulletin, v. 86, no. 4, p. 605-624.
[3] Amaefule, J. O., Altunbay, M., Tiab, D., Kersey, D. G., and Keelan, D. K., Enhanced Reservoir Description: Using Core and Log Data to Identify Hydraulic (Flow) Units and Predict Permeability in Uncored Intervals/Wells, in Proceedings SPE Annual Technical Conference and Exhibition1993, Volume All Days: SPE-26436-MS.
[4] Aqrawi, A. A. M., Keramati, M., Ehrenberg, S. N., Pickard, N., Moallemi, A., Svånå, T., Darke, G., Dickson, J. A. D., and Oxtoby, N. H., 2006, The origin of dolomite in the Asmari Formation (oligocene-lower miocene), dezful embayment, SW Iran: Journal of Petroleum Geology, v. 29, no. 4, p. 381-402.
[5] Carman P, C., 1937, Fluid flow through a granular bed: Trans. Inst. Chem. Eng. London, v. 15, p. 150-156.
[6] Ghazban, F., Motiei, H., and Dānishgāh-i Tihrān., 2007, Petroleum geology of the Persian Gulf, Tehran, Tehran University, 717 p. p.:
[7] Gomes, J. S., Ribeiro, M. T., Strohmenger, C. J., Negahban, S., and Kalam, M. Z., Carbonate Reservoir Rock Typing – The Link between Geology and SCAL, in Proceedings Abu Dhabi International Petroleum Exhibition and Conference2008, Volume All Days: SPE-118284-MS.
[8] Kozeny, J., 1927, Über kapillare Leitung des Wassers im Boden, Sitzungsberichte der Akademie der Wissenschaften in Wien, Volume 136, p. 271.
[9] Lucia, F. J., 1995, Rock-fabric/petrophysical classification of carbonate pore space for reservoir characterization: American Association of Petroleum Geologists Bulletin, v. 79, no. 9, p. 1275-1300.
[10] Pittman, E. D., 1992, Relationship of Porosity and Permeability to Various Parameters Derived from Mercury Injection-Capillary Pressure Curves for Sandstone1: AAPG Bulletin, v. 76, no. 2, p. 191-198.
[11] Siddiqui, S., Okasha, T. M., Funk, J. J., and Al-Harbi, A. M., 2006, Improvements in the selection criteria for representative special-core-analysis samples: SPE Reservoir Evaluation and Engineering, v. 9, no. 6, p. 647-653.
[12] Tiab, D., and Donaldson, E. C., 2023, Petrophysics; Theory and Practice of Measuring Reservoir Rock and Fluid Transport Properties, Gulf Professional Publishing.
[13] Van Buchem, F. S. P., Allan, T. L., Laursen, G. V., Lotfpour, M., Moallemi, A., Monibi, S., Motiei, H., Pickard, N. A. H., Tahmasbi, A. R., Vedrenne, V., and Vincent, B., 2010, Regional stratigraphic architecture and reservoir types of the Oligo-Miocene deposits in the Dezful Embayment (Asmari and Pabdeh Formations) SW Iran, Volume 329, p. 219-263.
International Journal of Mining and Geo-Engineering
Volume 58, Issue 1
March 2024
Pages 59-67

Files

Share

How to cite

Statistics