International Journal of Mining and Geo-Engineering

International Journal of Mining and Geo-Engineering

Keyword Index
A
  • ADECO-RS Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Analysis of Variance Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Arching effect, Soil arching Soil Arching Behind Retaining Walls under Active Translation Mode: Review and New Insights [Volume 52, Issue 2, 2018, Pages 131-140]
  • Artificial Bee Colony (ABC) Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries [Volume 52, Issue 1, 2018, Pages 31-36]
B
  • Back analysis Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Blasting Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Brazilian tensile strength Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
C
  • Coal Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Collapsibility index Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Completely Reversed Loading Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Correlation Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
  • Cumulative Damage Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
D
  • Daylight collapse Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Design and Construction Process (DCP) Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Design of experiment (DOE) Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Difficult geological conditions Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Discrete fracture network Developing a 3D stochastic discrete fracture network model for hydraulic analyses [Volume 52, Issue 2, 2018, Pages 167-175]
E
  • Earth Slopes Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
  • Electrum Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Engineering geology Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Epistemic Uncertainty Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Explosion Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Extension Principle Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
F
  • Failure mechanism Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]
  • Fatigue of rocks Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Fault Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Finite difference Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Finite Element Method Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
  • Fragmentation Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Fuzzy variogram Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
G
  • Geotechnical Engineering Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Geotechnical parameters Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Grain based model Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]
  • Ground vibration Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
H
  • Hydraulic analyses Developing a 3D stochastic discrete fracture network model for hydraulic analyses [Volume 52, Issue 2, 2018, Pages 167-175]
J
  • Jajarm Deposite Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Jointed rock mass Developing a 3D stochastic discrete fracture network model for hydraulic analyses [Volume 52, Issue 2, 2018, Pages 167-175]
K
  • Kerman Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Kerman City Investigating the Effect of Sedimentary Basin on Consolidation of Kerman Fine-Grained Soils [Volume 52, Issue 2, 2018, Pages 125-129]
  • Keywords: Hydrothermal alteration Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Kruskal-Wallis Test Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
L
  • Lateral earth pressure Soil Arching Behind Retaining Walls under Active Translation Mode: Review and New Insights [Volume 52, Issue 2, 2018, Pages 131-140]
  • Limit equilibrium Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Linear Damage Rule Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
M
  • Mathematical relations Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Mechanized tunneling Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Mineral Resource Evaluation Grade estimation of Zu2 Jajarm deposit by considering imprecise variogram model parameters based on the extension principle [Volume 52, Issue 2, 2018, Pages 161-165]
  • Minimum/maximum autocorrelation factors Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Mogok Metamorphic Belt Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Multivariate simulation Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
N
  • Native gold Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Newmark displacement analysis Comparison of pseudo-static, Newmark and dynamic response analysis of the final pit wall of Sungun copper mine [Volume 52, Issue 2, 2018, Pages 141-147]
O
  • Open pit mining Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Ordinary Stone Column Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
P
  • Particle Swarm Optimization The application of Committee machine with particle swarm optimization to the assessment of permeability based on thin section image analysis [Volume 52, Issue 2, 2018, Pages 177-185]
  • Particle Swarm Optimization (PSO) Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries [Volume 52, Issue 1, 2018, Pages 31-36]
  • Peak particle velocity Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Permeability The application of Committee machine with particle swarm optimization to the assessment of permeability based on thin section image analysis [Volume 52, Issue 2, 2018, Pages 177-185]
  • Pillar burst The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas [Volume 52, Issue 2, 2018, Pages 105-117]
  • Pillar design The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas [Volume 52, Issue 2, 2018, Pages 105-117]
  • Point of inflection Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Predictive equation Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Programming aspects Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
Q
  • Quality-tonnage curves Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
R
  • Retaining walls Soil Arching Behind Retaining Walls under Active Translation Mode: Review and New Insights [Volume 52, Issue 2, 2018, Pages 131-140]
  • Rigid Stone Column Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
S
  • Sabzkuh tunnel Tunnel design and construction process in difficult ground conditions with Analysis of Controlled Deformations (ADECO) approach; a Case Study [Volume 52, Issue 2, 2018, Pages 149-160]
  • Sagaing Fault Hydrothermal Gold Mineralization and Some Features of Ore Mineral at Onzon-Kanbani Area, Central Myanmar [Volume 52, Issue 2, 2018, Pages 95-103]
  • Sawing machines Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries [Volume 52, Issue 1, 2018, Pages 31-36]
  • Schmidt hammer hardness Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
  • Sedimentary model Investigating the Effect of Sedimentary Basin on Consolidation of Kerman Fine-Grained Soils [Volume 52, Issue 2, 2018, Pages 125-129]
  • Segment Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Seismic retrofitting Tunnel Rehabilitation in Fault Zone Using Sequential Joints Method- Case Study: Karaj Water Conveyance Tunnel [Volume 52, Issue 1, 2018, Pages 87-94]
  • Seismic source mechanism The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas [Volume 52, Issue 2, 2018, Pages 105-117]
  • Settlement trough width (STW) Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Size distribution Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines [Volume 52, Issue 2, 2018, Pages 187-197]
  • Slope stability Back analysis of inter-ramp slope failure in Teghout copper mine [Volume 52, Issue 2, 2018, Pages 207-214]
  • Soil Stabilization Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Soil Strength Behaviour Predicting the Behaviour of Stabilized Lateritic Soils Treated with Green Crude Oil (GCO) by Analysis of Variance Approaches [Volume 52, Issue 1, 2018, Pages 37-42]
  • Soil structure Investigating the Development of Kerman’s Soil Structure and its Effect on the Collapsibility index [Volume 52, Issue 1, 2018, Pages 43-51]
  • Spatial cross-correlation Assessment of uncertainty for coal quality-tonnage curves through minimum spatial cross-correlation simulation [Volume 52, Issue 1, 2018, Pages 75-86]
  • Stability Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns [Volume 52, Issue 1, 2018, Pages 23-30]
  • Statistical Analysis Studying Peak Particle Velocity Due to Blast in Development Tunnels’ Face in Coal Stoping [Volume 52, Issue 1, 2018, Pages 69-74]
  • Stress-Life method Cumulative Fatigue Damage Under stepwise Tension-Compression Loading [Volume 52, Issue 1, 2018, Pages 17-21]
  • Sungun copper mine Comparison of pseudo-static, Newmark and dynamic response analysis of the final pit wall of Sungun copper mine [Volume 52, Issue 2, 2018, Pages 141-147]
T
  • Taguchi’s method Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE) [Volume 52, Issue 1, 2018, Pages 7-15]
  • Transition elements Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
U
  • UDEC Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]
  • Uniaxial compressive strength Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength [Volume 52, Issue 2, 2018, Pages 199-206]
V
  • Validating example Computational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program [Volume 52, Issue 2, 2018, Pages 119-123]
  • Voronoi model Distinct element modelling of the mechanical behaviour of intact rocks using voronoi tessellation model [Volume 52, Issue 1, 2018, Pages 61-68]