Abdollahi, Hadi Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
AGHAJANI, HAMID Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
Akhyani, Masoud Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
Alaei, Rasool Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
Alipour, Aref A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
Asghari, Omid Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
Asqarian, Hadi Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
Ataei, Mohamad Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
Azizzadeh, Mehran Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
B
Baghbanan, Alireza Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
Bagherian, Asghar Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
Bahaaddini, Mojtaba DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
Bahadori, Moein Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
Bahrami, Ataallah Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
Bakhshandeh Amnieh, Hassan Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
Bakhshandeh Amnieh, Hassan Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
Bakhshandeh Amnieh, Hassan Predicting the Occurrence of Hydraulic Fracture in Grouting Operations Based on the Pressure in the Penetrated Cement Grout [Volume 51, Issue 2, 2017, Pages 113-118]
Bakhtavar, Ezzeddin Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
Behnamfard, Ali Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
D
Daneshvar, Abdolsalam Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
E
Esmailvandi, Mahmoud A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
Esmailvandi, Mahmoud Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
G
Ghadernejad, Saleh Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
Ghiasi-Freez, Javad An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
Gholipour, Yaghoob Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
H
Hajiazizi, Mohammad Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system [Volume 51, Issue 2, 2017, Pages 133-138]
Hamedi Azad, Farzaneh DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
Hasani, Hossein Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
Hashemi, Mina Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system [Volume 51, Issue 2, 2017, Pages 133-138]
Hashemolhosseini, Hamid Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
Hossaini, Mohammad Farouq Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
Hosseini, Mohammad Raouf Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
Hosseini-Nasab, Marzieh Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
J
Jafari, Ahmad Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
Jafari, Ahmad A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
K
Kefayati, Sadegh Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
Khoshbakht, Farhad Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
Khoshdast, Hami Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
Khoshdast, Hamid Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
Khosravi, Mohammad Hossein A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
Khosravi, Mohammad Hossein DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
L
Lotfian, Reza Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
M
Majdi, Abbas Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
Majdi, Abbas Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
Manafi, Zahra Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
Masoudi, Majid Predicting the Occurrence of Hydraulic Fracture in Grouting Operations Based on the Pressure in the Penetrated Cement Grout [Volume 51, Issue 2, 2017, Pages 113-118]
Mehrabani, Javad vazifeEffects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
Memarian, Hossein Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
Mikaeil, Reza Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
Mikaeil, Reza Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
Mirmohammadlou, Aliasghar -Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
Moafi Madani, Elyyeh Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
Mohammadi, Soheil Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
N
Najmoddini, Iraj Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
Narimani, Roohollah Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
Nazari Ostad, Mohsen Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
Noaparast, Mohammad Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
P
Pipatpongsa, Thirapong A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
Pipatpongsa, Thirapong DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
Pourghahramani, Parviz Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
Pouyan, Ali A. An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
R
Rafiee, Ali Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
Rahimi, Mohammadhosein Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
Rastbood, Armin Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
Rezaei, Mohammad Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
S
Sadighi Hashtjin, Mehdi Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
SALEHI, SOGHRA The role of catalyst in the passivation of chalcopyrite during leaching [Volume 51, Issue 1, 2017, Pages 91-96]
Samimi Namin, Farhad A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
Sarfaraz, Hassan A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
Sereshki, Farhang Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
Shafaei, Sied Ziaeddin Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
Shojaei, Vahideh Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
Soleimani, Mehrdad Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
Soltani, Poorandokht Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
T
Taji, Mohammad Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
Tavakkoli-Moghaddam, Reza A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
Torkan, Masoud Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
Y
Yousefzadeh, Rahman An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
Z
Ziaii, Mansur An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
