International Journal of Mining and Geo-Engineering

International Journal of Mining and Geo-Engineering

Experimental investigation of soil and silica characteristics and operational conditions affecting cutting tool wear in mechanized tunneling

Document Type : Research Paper

Authors
Department of Mining Engineering, Sahand University of Technology, Tabriz, Iran.
10.22059/ijmge.2026.404261.595323
Abstract
This study investigates the wear of cutting tools in mechanized tunneling, focusing on the effects of soil composition and silica particle size distribution on tool degradation. Laboratory experiments were conducted using soil samples from the Tabriz Metro Line 2 excavation site and silica materials to simulate real-world tunneling conditions. The study indicated that moisture content, test duration, and rotation speed influenced cutting tool wear during mechanized tunneling. Initially, increasing moisture content up to 5% caused higher wear, but beyond that, it acted as a lubricant, reducing wear. Test duration showed a cumulative effect, with wear increasing progressively over time as tools became more exposed to abrasive forces. Higher rotation speeds also led to greater wear due to increased friction and more frequent contact with soil particles. These findings highlight the importance of optimizing moisture levels, operational time, and rotation speed to minimize tool wear and enhance tunneling efficiency. This study provides valuable insights for optimizing tunneling operations, reducing tool wear, and enhancing TBM (Tunnel Boring Machine) efficiency by selecting appropriate soil types and adjusting operational parameters.
Keywords
Subjects

[1]. She, L., Zhang, S. R., Wang, C., Li, Y. L., & Du, M. (2023). A new method for wear estimation of TBM disc cutter based on energy analysis. Tunnelling and Underground Space Technology, 131, 104840, https://doi.org/10.1016/j.tust.2022.104840.
[2]. Li, X., Wu, J., & Huo, P. (2023). Prediction model for the teeth hob cutter of tunnel boring machines in high-content quartzite strata. KSCE Journal of Civil Engineering, 27(1), 371-383, https://doi.org/10.1007/s12205-022-0082-9.
[3]. Y. Zhang, J. Chen, S. Han, et al., Big data-based performance analysis of tunnel boring machine tunneling using deep learning, Buildings 12 (10) (2022) 1567, https://doi.org/10.3390/buildings12101567.
[4]. Fu, J., Xia, Y., Zhang, L., Zhang, X., & Zhao, S. (2020). Failure analysis on the fracture of disc cutter in EPB shield machine. Engineering Failure Analysis, 108, 104341, https://doi.org/10.1016/j.engfailanal.2019.104341.
[5]. Duan, W., Zhang, L., Zhang, M., Su, Y., Mo, J., & Zhou, Z. (2022). Numerical and experimental studies on the effects of the TBM cutter profile on rock cutting. KSCE Journal of Civil Engineering, 26, 416-432, https://doi.org/10.1007/s12205-021-2111-5.
[6]. Wang, L., Li, H., Zhao, X., & Zhang, Q. (2017). Development of a prediction model for the wear evolution of disc cutters on rock TBM cutterhead. Tunnelling and Underground Space Technology, 67, 147-157, https://doi.org/10.1016/j.tust.2017.05.003.
[7]. Ge, Y., Liu, Y., Lin, P., & Xu, Z. (2022). Effects of rock properties on the wear of TBM disc cutter: A case study of the Yellow River diversion project, China. International Journal of Geomechanics, 22(4), 04022011, https://doi.org/10.1061/(ASCE)GM.1943-5622.0002344.
[8]. Su, W., Li, X., Jin, D., Yang, Y., Qin, R., & Wang, X. (2020). Analysis and prediction of TBM disc cutter wear when tunneling in hard rock strata: A case study of a metro tunnel excavation in Shenzhen, China. Wear, 446, 203190, https://doi.org/10.1016/j.wear.2020.203190.
[9]. Ren, D. J., Shen, S. L., Zhou, A., & Chai, J. C. (2018). Prediction of lateral continuous wear of cutter ring in soft ground with quartz sand. Computers and Geotechnics, 103, 86-92, https://doi.org/10.1016/j.compgeo.2018.07.015.
[10]. Zhang, Z., Zhang, K., Dong, W., & Zhang, B. (2020). Study of rock-cutting process by disc cutters in mixed ground based on three-dimensional particle flow model. Rock Mechanics and Rock Engineering, 53, 3485-3506.
[11]. Zhao, Y., Yang, H., Chen, Z., Chen, X., Huang, L., & Liu, S. (2019). Effects of jointed rock mass and mixed ground conditions on the cutting efficiency and cutter wear of tunnel boring machine. Rock Mechanics and Rock Engineering, 52, 1303-1313.
[12]. Fu, K., Qiu, D., Xue, Y., Shao, T., & Lan, G. (2024). TBM tunneling strata automatic identification and working conditions decision support. Automation in Construction, 163, 105425.
[13]. Zhang, K., Yang, H., & Zhang, Z. (2024). Experimental and numerical investigations on the force characteristics of cutter in different regions of the TBM cutterhead. Tunnelling and Underground Space Technology, 149, 105800.
[14]. Gertsch, R., Gertsch, L., & Rostami, J. (2007). Disc cutting tests in Colorado Red Granite: Implications for TBM performance prediction. International Journal of rock mechanics and mining sciences, 44(2), 238-246.
[15]. Peng, X., Liu, Q., Pan, Y., Lei, G., Wei, L., & Luo, C. (2018). Study on the influence of different control modes on TBM disc cutter performance by rotary cutting tests. Rock Mechanics and Rock Engineering, 51, 961-967.
[16]. Drucker, P. (2011). Validity of the LCPC abrasivity coefficient through the example of a recent Danube gravel/Aussagekraft des LCPC‐Abrasivitätskoeffizienten am Beispiel eines rezenten Donauschotters. Geomechanics and Tunnelling, 4(6), 681-691.
[17]. Jakobsen, P. D., & Lohne, J. (2013). Challenges of methods and approaches for estimating soil abrasivity in soft ground TBM tunnelling. Wear, 308(1-2), 166-173.
[18]. Düllmann, J., Alber, M., & Plinninger, R. J. (2014). Determining soil abrasiveness by use of index tests versus using intrinsic soil parameters/Bewertung der Abrasivität von Lockergesteinen mit Indexverfahren und herkömmlichen Bodenkennwerten. Geomechanics and Tunnelling, 7(1), 87-97.
[19]. Bakar, M. A. (2014). Reduced propeller speed effects on LCPC rock abrasivity test. Pakistan Journal of Science, 66(1).
[20]. Bakar, M. A., Majeed, Y., Rashid, M. A., & Ahmed, F. (2021). Wear mechanisms of LCPC rock abrasivity test impellers of materials equivalent to TBM cutter head face tools. Tunnelling and Underground Space Technology, 116, 104122.
[21]. Chung, C., Cai, B. X., & Chinomona, B. (2025). Prescriptive tool wear Control: Tool wear early prediction and cutting parameter regulation for discrete turning operations. Engineering Applications of Artificial Intelligence, 156, 111238.
[22]. Liu, M., Xie, H., Pan, W., Ding, S., & Li, G. (2025). Prediction of cutting force via machine learning: state of the art, challenges and potentials. Journal of Intelligent Manufacturing, 36(2), 703-764.
[23]. Zhou, T., Zhang, M., Hu, T., Meng, L., Yi, M., Zhang, J., & Xu, C. (2025). Research on the online monitoring method of cutting tool wear based on the mechanism-data fusion concept of digital twin. Journal of Manufacturing Processes, 148, 386-407.
[24]. de Paiva Silva, G., Gomes, M. C., da Silva, M. B., Malcher, L., & de Oliveira, D. (2025). Experimental validation of cutting forces modeling in micromilling of Inconel 718 considering material heterogeneity and wear-induced tool edge rounding. Journal of Manufacturing Processes, 146, 303-319.
[25]. Roushan, A. (2025). Effect of discrete and continuous texture geometries on tool wear and derivative cutting effect during the machining. Wear, 568, 205964.
[26]. Janc, B., Jovičić, V., & Vukelić, Ž. (2020). Laboratory test methods for assessing the abrasivity of rocks and soils in geotechnology and mining applications. Min. Environ, 67, 103-117.
[27]. Mousapour, H., Chakeri, H., Darbor, M., & Hekmatnejad, A. (2023). Evaluating the wear of cutting tools using a tunnel boring machine laboratory simulator. Mining of Mineral Deposits, 17(2), 28-34.
[28]. Ansari, T., Chakeri, H., Darbor, M., Amoun, S., & Shakeri, H. (2024). Investigating Effect of Soil Grading Parameters on Tool Wear in Mechanized Tunneling using EPB-TBM Machine. Journal of Mining and Environment, 15(1), 301-321.
[29]. Lin, L., Zeng, J., Fu, J., Wu, D., Cheng, H., & Xia, Y. (2024). Experimental study of the wear behavior of tunnel boring machine disc cutter ring under Fe-based coatings. Wear, 548, 205361.
[30]. Budach, C., von Taschitzki, N., Katrakova-Krüger, D., & Erdmann, P. (2025). Abrasiveness in soft soil: New results of research project and round robin LCPC test. In Tunnelling into a Sustainable Future–Methods and Technologies (pp. 961-968). CRC Press.
[31]. Zhuo, B., Wang, Y., Fang, Y., Liu, J., Jiang, Y., & Hu, X. (2025). Study on Wear Characteristics and Improvement Countermeasures of Shield Cutter in Sandy Strata. Wear, 206129, https://doi.org/10.1016/j.wear.2025.206129.
[32]. ASTM D422-63, "standard test method for particle-size analysis of soils (With drawn 2016)," ASTM International, West Conshohocken, PA, 2007

Articles in Press, Accepted Manuscript
Available Online from 16 November 2026