A
-
Abdollahi, Hadi
Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
-
AGHAJANI, HAMID
Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
-
Akhyani, Masoud
Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
-
Alaei, Rasool
Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
-
Alipour, Aref
A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
-
Asghari, Omid
Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
-
Asqarian, Hadi
Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
-
Ataei, Mohamad
Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
-
Azizzadeh, Mehran
Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
B
-
Baghbanan, Alireza
Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
-
Bagherian, Asghar
Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
-
Bahaaddini, Mojtaba
DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
-
Bahadori, Moein
Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
-
Bahrami, Ataallah
Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
-
Bakhshandeh Amnieh, Hassan
Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
-
Bakhshandeh Amnieh, Hassan
Numerical Analysis of the Primer Location Effect on Ground Vibration Caused by Blasting [Volume 51, Issue 1, 2017, Pages 53-62]
-
Bakhshandeh Amnieh, Hassan
Predicting the Occurrence of Hydraulic Fracture in Grouting Operations Based on the Pressure in the Penetrated Cement Grout [Volume 51, Issue 2, 2017, Pages 113-118]
-
Bakhtavar, Ezzeddin
Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
-
Behnamfard, Ali
Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS) [Volume 51, Issue 1, 2017, Pages 29-35]
D
-
Daneshvar, Abdolsalam
Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
E
-
Esmailvandi, Mahmoud
A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
-
Esmailvandi, Mahmoud
Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
G
-
Ghadernejad, Saleh
Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
-
Ghiasi-Freez, Javad
An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
-
Gholipour, Yaghoob
Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
H
-
Hajiazizi, Mohammad
Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system [Volume 51, Issue 2, 2017, Pages 133-138]
-
Hamedi Azad, Farzaneh
DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
-
Hasani, Hossein
Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
-
Hashemi, Mina
Predicting three-dimensional displacement around the tunnel and its impact on the value of Q-system [Volume 51, Issue 2, 2017, Pages 133-138]
-
Hashemolhosseini, Hamid
Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
-
Hossaini, Mohammad Farouq
Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
-
Hosseini, Mohammad Raouf
Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
-
Hosseini-Nasab, Marzieh
Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
J
-
Jafari, Ahmad
Prediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine [Volume 51, Issue 1, 2017, Pages 23-28]
-
Jafari, Ahmad
A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
K
-
Kefayati, Sadegh
Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
-
Khoshbakht, Farhad
Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
-
Khoshdast, Hami
Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
-
Khoshdast, Hamid
Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
-
Khosravi, Mohammad Hossein
A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
-
Khosravi, Mohammad Hossein
DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
L
-
Lotfian, Reza
Applying an integrated fuzzy gray MCDM approach: A case study on mineral processing plant site selection [Volume 51, Issue 2, 2017, Pages 177-183]
M
-
Majdi, Abbas
Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
-
Majdi, Abbas
Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
-
Manafi, Zahra
Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
-
Masoudi, Majid
Predicting the Occurrence of Hydraulic Fracture in Grouting Operations Based on the Pressure in the Penetrated Cement Grout [Volume 51, Issue 2, 2017, Pages 113-118]
-
Mehrabani, Javad vazife
Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
-
Memarian, Hossein
Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
-
Mikaeil, Reza
Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process [Volume 51, Issue 2, 2017, Pages 125-132]
-
Mikaeil, Reza
Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
-
Mirmohammadlou, Aliasghar -
Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
-
Moafi Madani, Elyyeh
Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
-
Mohammadi, Soheil
Experimental and Numerical Investigation of Rock Dynamic Fracture [Volume 51, Issue 1, 2017, Pages 37-46]
N
-
Najmoddini, Iraj
Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
-
Narimani, Roohollah
Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
-
Nazari Ostad, Mohsen
Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
-
Noaparast, Mohammad
Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
P
-
Pipatpongsa, Thirapong
A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
-
Pipatpongsa, Thirapong
DEM Analysis of Backfilled Walls Subjected to Active Translation Mode [Volume 51, Issue 2, 2017, Pages 191-197]
-
Pourghahramani, Parviz
Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate [Volume 51, Issue 2, 2017, Pages 147-150]
-
Pouyan, Ali A.
An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
R
-
Rafiee, Ali
Categorical fracture orientation modeling: applied to an Iranian oil field [Volume 51, Issue 2, 2017, Pages 139-146]
-
Rahimi, Mohammadhosein
Preliminary Beneficiation and Washability Studies on Ghouzlou's Low-Ash Coal Sample [Volume 51, Issue 2, 2017, Pages 119-123]
-
Rastbood, Armin
Prediction of structural forces of segmental tunnel lining using FEM based artificial neural network [Volume 51, Issue 1, 2017, Pages 71-78]
-
Rezaei, Mohammad
Determination of the height of destressed zone above the mined panel: An ANN model [Volume 51, Issue 1, 2017, Pages 1-7]
S
-
Sadighi Hashtjin, Mehdi
Regional simulation and landslide risk prediction based on bivariate logistic regression (A case study: Pahne Kola watershed in north of Iran) [Volume 51, Issue 2, 2017, Pages 105-112]
-
SALEHI, SOGHRA
The role of catalyst in the passivation of chalcopyrite during leaching [Volume 51, Issue 1, 2017, Pages 91-96]
-
Samimi Namin, Farhad
A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis [Volume 51, Issue 2, 2017, Pages 161-176]
-
Sarfaraz, Hassan
A Numerical Analysis on the Performance of Counterweight Balance on the Stability of Undercut Slopes [Volume 51, Issue 1, 2017, Pages 63-69]
-
Sereshki, Farhang
Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
-
Shafaei, Sied Ziaeddin
Mixed moderate thermophilic bioleaching of Cu, Mo and Re from molybdenite concentrate: effects of silver ion, medium and energy sources [Volume 51, Issue 2, 2017, Pages 151-159]
-
Shojaei, Vahideh
Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier [Volume 51, Issue 1, 2017, Pages 9-24]
-
Soleimani, Mehrdad
Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
-
Soltani, Poorandokht
Faults and fractures detection in 2D seismic data based on principal component analysis [Volume 51, Issue 2, 2017, Pages 199-207]
T
-
Taji, Mohammad
Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm [Volume 51, Issue 2, 2017, Pages 185-190]
-
Tavakkoli-Moghaddam, Reza
A genetic algorithm approach for open-pit mine production scheduling [Volume 51, Issue 1, 2017, Pages 47-52]
-
Torkan, Masoud
Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach [Volume 51, Issue 1, 2017, Pages 79-90]
Y
-
Yousefzadeh, Rahman
An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
Z
-
Ziaii, Mansur
An Image Analysis-Based Methodology for Chromite Exploration through Opto-Geometric Parameters; a Case Study in Faryab Area, SE of Iran [Volume 51, Issue 1, 2017, Pages 97-104]
Your query does not match with any item